Fella in the States buts a 1975 Norton Commando still in the crate

Back in 1975 I was a 13 teen year old with Motorcycle posters and pages from the MCN plastered all over my walls and even my ceiling, I was always into Motorcycles, and I remembered the day when I saw the article that Norton were bringing out a double disc 850 Commando that had an electric start, wow, that was cool as for me, I was a little bugger then and all the Brit bikes were super hard to kick over if they didn’t have a valve lift, well, not for a 80 pound teenager anyway.

So, when I saw that the New 850cc Norton had a “Lecky Start” I was super stoked, also Norton had an array of color schemes but I lobed the traditional JPS style of Livery the Black and gold or Black and Silver did it for me.

 

Below, Fella out here buys a 1975 850 Norton Commando still in the Original crate, like me, i would of put it together too but many purists cry about it, feck it, its a Motorcycle, they were made to ride not rot away in a box.

Comfort ;
Mk3 Commandos were mostly delivered in two forms, the Roadster, as in the pics, and the Interstate, which had a vast touring fuel tank and a rearwardly displaced seat to allow it to fit. The side panels were also different, but the bikes were mechanically identical.
Roadsters got wide bars, so the rider sat upright, with the small tank fitting easily between the knees.
It’s very comfortable. Lots of riders fit dropped bars. No idea why. Slightly more challenging is the Interstate, which typically came fitted with flat touring bars and the rider’s backside rests about six inches further back than on the Roadster. Many people consider this to be a great fast touring posture. Others beg to differ. Changing bars is cheap, footrests less so.
Equipment;
As basic as it is traditional. Speedo and tacho (from a couple of different suppliers – just to give concours terrorists the vapours) and a small collection of idiot lights mounted in a neat panel between the clocks. Lucas switchgear and electrical gubbins, but an American Prestolite starter motor.

Triumph Bonneville 2014 T100 FOR SALE $6500

Up for sale is my Girls Triumph Bonneville T100 Special, this bike is a turn key model and ready to have fun on the tarmac this summer, cleaner than a cats arse and a lot of fun to ride, this twinline is a great all round Motorcycle that will give you many miles of smiles that’s for certain.

You are looking at a very well looked after and maintained Triumph Bonneville, this is Jennifer’s personal bike and I have made sure this has always been in great condition, fires right up and has a velvet tone that exits from my Own Stainless Steel Dunstall style megaphones that I hand made.

If you are looking for a well loved and treated Motorcycle, hard to beat this one, never thrashed, over revved or misused, this T100 runs like a well oiled Swiss Watch and it seems to be quite the head turner where ever it travels too.

This Bonneville has been regularly serviced and Recently had New Fuel Pump and New Battery installed at Triumph, the bike has always been garaged and not left to the elements that many are, so a great opportunity to have a low milage un abused Motorcycle that will not let you down.

This Motorcycle has had some upgrades, like Led Brake lights, Stainless Exhaust System, BC Handlebars, Custom Grips, headlight Visor,Pedestrian front fender License plate, Polished Front fork brace to give great stability. And of course engine side covers have been triple chromed and polished to show quality.

You will also notice that this bike has a set of Saddle bags attached, these are removable but so handy and they have been used many times on our travels, a god send to fit jackets, gloves and tools etc for long trips, I Used Triumph brackets for the bags and then fitted Black ABS Luggage bags to them. I was going to paint them to match the tank, but- they were so useful, we could never take them off lol.

The Triumph also has LED turn signals that get you noticed, a New Battery Just added too, a very clean bike that anyone would love to own and ride of course, the bike has been well looked after and will be missed when she is gone.

Comfortable Custom Metalflake grips give this machine that 1960’s feel and the exhaust tone is like no other Triumph out there, handmade by me and tuned to run to them, this bike is great on gas too.

Below is the Mileage as of right now.

A great Motorcycle for any rider, the power is smooth, linear throttle increase, makes this bike a cinch to ride and enjoyable all day long, this will look at home in any stable.

If you are interested then the bike is $6500 and have pink slip in hand, current tags too and ready to ride home wherever you are located, a fun machine that will make you smile right away.

Give us a call on 714-598-8392 or text on the same number or email me at carpy@carpyscaferacer.com

My other bike, the Triumph Scrambler

I have always been into dirt bikes as I call them, from when i was a teenager and before I guess, My brother and I used to drool over the pages of MotorCycle News or Dirt bike magazine, we came from a humble home where there was never any extra money, so we made the best with what we could find, and even though we found old buckets of snot, we would get them running and keep up with the rich kids on their machines.

I used to love my T100 Daytona in North London, that thing was faster than a 750 and I rode the snot out of that bike.

I will always have some sort of two wheeled motorcycle, no matter what age I am lucky enough to live too and today i cleaned up my triumph Scrambler, this 2016 900 air cooled Triumph is my daily and, I use it every day with no issues, I make sure that it always had Gas, check the tire pressures and make sure I have enough oil in this puppy and she fires up every time with no worries.

 

I love ALL motorcycles, be it Cafe Racer, Brat bike, Custom, Drag, MotoX, Speedway, Flat track or even trials, I love all them styles and if I was a rich guy, I would have every bike I always wanted to own, from Steve McQueen’s Triumph, to Barry Sheene’s Heron Suzuki trans Atlantic machine, but I’m not rich and can always dream.

But- I always have fun on what ever machine that I am riding and hope that some of you share the same smile that I get when I sling my leg over a Motorcycle.

Jennifer and I have a Triumph each, she has a T100 Bonneville and we go and explore places like the Grand Canyon, or the Sedona mountains to the petrified Forrest of Arizona, always time to check out the great sights that the USA has for us and there are so many places for us to go visit, we would need 5 lifetimes, but- its fun trying.

Have fun with your machine as much as you can, there is always somewhere to ride, even in the rain and wind.

Jennifer and I love riding together, her Bonneville is as fast as mine, she also experienced crazy 70 mph cross winds for the first time but Boy! What an adventure we had.

 

 

Norton Reveals Two New Motorcycles.

Well, it is has been a while since I have heard anything much about Norton as of late, the Commando range didn’t really seem to take off, but the price range I am sure was a massive factor when it came to that, its all about price tagging and making classic Iconic names affordable these days. but all that is now about to change and not one but Two new Motorcycles are now coining out to the tarmac and I for one am happy about that.

Stuart Garner the ceo and Owner of Norton Motorcycles has busted his own nut to get these 2 cool machines ready for the public to see,  the New 650 parallel twin machine is something I am eager to take a look at, seems to have derived from the v4 1200cc machine.

But, the Norton Atlas Ranger is a great looking Dual Purpose motorcycle that looks pretty darn rugged to be honest. With a longer swing arm and footpegs wide enough to help you stand up and tap the tank with your knee’s, this scrambler is very cool. I see that they have kept the price quite competitive, opening at 10,000 pounds with the Scrambler at 12,00 but relatively cheap for Norton, they are so much into these 650 machines, that they have just now started to build a factory out the back of the place just for them 2 models, so it shows the commitment that Norton has and I believe this will be quite a competitive motorcycle in the UK as well as over here in the USA.

Wicked bits of kit to look at and I for want would like to at least have the opportunity to sling my leg over these great machines.

The Atlas looks superb and if I had a hat on right now, I would tip it towards Stuart garner, great concept fella and sure hope to see some of these on the So Cal Roads next year.

Thanks for reading my Blog today and hope this made you smile as much as I did when I heard about these motorcycles coming out.

My New Triumph Scrambler 900

Well, for some time now I have wanted a Triumph 900 Scrambler, many times I have looked and pondered more than the French Sculpture in Paris.  But for some reason I never went ahead and bit the bullet so to speak, but after many years of laying on a gas tank, it was time for a change and for a few reasons too.

    1. My girlfriend Jennifer rides a T100 Bonneville and wanted to be on an even par in power and fuel range.
    2. When we last went out Jennifer took in all the sights whilst sat upon her Bonneville, whilst all I saw was either gauges or Apexes of corners coming up etc.So I decided to sell my Thruxton and start to look out for a Scrambler instead. Not long until the Thruxton was Sold, I was already taking a peek at Scramblers, and I first went down to the local Triumph dealer to look at Brand spanking New models. But after having a look, I was not happy with these models as too much cheap arse plastic was put on them, of course the salesman tries to make it sound like a deal but to me it was about as inviting as hemorrhoids.

They said if I wait until April, the New Scrambler will be out, they want 2 arms and 3 legs for that, no thanks, as I want an affordable ride and the gauntlet had been thrown as my local dealer didnt want to help at all this time, so feck them, we shall locate our own.

I looked at many with Jennifer online, lots were clunkers, broke or beaten up or just had a rough life, I was keen on the matt pearl Blue version but most I looked at were Black, we saw one that was not too bad in the pics, the owner said it was great, so we got up super early, drove for 4 hours only to find a bike that had more issues than a homeless drunk with a meth addiction.I took it for a ride, the chain clunked like an ill fitting chastity belt and the fork seals had blown, as well as brake fluid had spillled at some point in its life and took a few layers of paint off the headstock, what a waste of time, so we jumped in the van and drove all the way home.

But at last, Jennifer’s friend she originally went to high School was selling one and just down the road, only to find out I was there in the show room when i originally was looking at bikes and I told him the scrambler was his best bet, so- as he has a ton of bikes and this scrambler had 459 miles on it and of course was pearl matt Blue, a deal was struck and I loaded the bike up into the van and bought it home, well happy.

So there it is, as stock as the proverbial rock, and it will not stay like that for too long as I am always thinking of things to do on my own rides and this is no exception.

I added a stainless Steel Tank Strap and a new set of grips, but I want the Mirrors and seat gone as thats too stock looking for me.

Now thats better, a smaller seat with a Chromed rack to carry stuff, just what I need, I shall re-upholster a little later on though, maybe diamond stitching?

Looks better already and it is a lot of fun riding this Scrambler and I am looking forward to clocking a few miles up on the odometer soon with Jennifer on her Bonneville.

Eventually I shall get ride of the exhaust system for something of mine and makes a little bit of noise and more power, but for now its fine.

So I can get more things to carry with me when I am on a trip etc, I thought that I would add an Ammo Box as a pannier bag and am happy at how this looks, didnt want a huge version as it would offset the bike too much, but this is perfect to what I need and happy I went ahead and fitted this to the bike.

I may make a stencil and paint something on the side, not sure what yet but something to think about and now Ii have somewhere to put my gloves, hat and scarf when we stop.

Eventually I shall  remove the ugly plastic rear tail light assembly but need to think of something cool first but thats next on the list of modifications I need to complete on this machine.

Don’t be fooled by the Scrambler’s retro design because every mechanical detail in it is about as modern as it gets. The tubular steel, twin cradle frame can be clearly seen from a distance, evoking Triumph’s classic style ethos. The exhausts are also prominently shown, extending all the way from the bolted engine under the seat to the rear, just above the 17-inch, 40-spoke wire rear wheel.

The pair of Kayabasa chromed shocks at the back of the bike are also easily detectable, adding to the classic look of the bike while also providing a balanced and effective damping, giving riders the confidence to hit the road with the bike’s suspension credentials. A 19-inch 34-spoke wire wheel sits comfortably at the front, wrapped around block-treaded tires to give it the tool it needs to get outstanding on-road performance in any kind of road surface.

To keep the Scrambler in tip-top shape, Triumph also installed a single front disc brake and a rear equivalent courtesy of Nissin to help provide stopping power that doesn’t jolt you out of your seat.

 

Design Specifications

Length 2213mm
Width handlebars 860
Height without mirror 1202mm
Seat height 825mm
Wheelbase 1500mm
Rake 27.8º
Trail 105mm
Tank capacity 16l
Wet weight 230 kg
Dry weight 214 kg
Color Options Matt Pacific Blue, Diablo Red Lunar Silver

Frame Specifications

Frame Tubular steel cradle
Swingarm Twin-sided, tubular steel
Front Wheels 36-spoke 19 x 2.5in
Rear Wheels 40-spoke 17 x 3.5in
Front Tyres 100/90-19
Rear Tyres 130/80-17
Front Suspension Kayaba 41mm forks, 120mm travel
Rear Suspension Kayaba chromed spring twin shocks with adjustable preload, 106mm rear wheel travel
Brakes front Single 310mm disc, Nissin 2-piston floating caliper
Brakes rear Single 255mm disc, Nissin 2-piston floating caliper
Instrument display and functions Analogue speedometer with odometer and trip information.

 

The Triumph Scrambler is powered by a Bonneville-based 865 cc, air-cooled, eight-valve engine that develops 58 horsepower and 50 pound-feet of torque at 4,750 rpm and mated to a five-speed transmission.

Move to the back and you’ll see a pair of twin chromed stainless steel exhaust pipes and heat shields that not only serve their mechanical purposes of meeting noise emission regulations but also pays homage to the 1960s Triumph TR6C Trophy Special.

The engine itself doesn’t have crazy numbers, but it does have enough to give riders all sorts of fun when prowling the road. The Scrambler is capable of covering 0 to 60 mph in 6.2 seconds to go with a top speed of 125 mph. It’s also the most fuel efficient engine in the Triumph range, allowing the Scrambler to cover as much as 72 mpg.

Drivetrain Specifications

Engine type Air-cooled, DOHC, parallel-twin, 270º firing interval
Capacity 865cc
Bore 90mm
Stroke 68mm
Fuel system Multipoint sequential electronic fuel injection with SAI
Exhaust High level stainless steel headers with twin chromed silencers
Final drive X ring chain
Clutch Wet, multi-plate
Gearbox 5-Speed
Oil capacity 4.5L
Max power ec 59BHP @ 6800
Max torque ec 68NM @ 4750
Fuel Consumption urban 56mpg
Fuel Consumption 56mph/90kph 72mpg
Fuel Consumption 75mph/120kph 57mpg

FOR SALE- 2014 TRIUMPH THRUXTON 900 EFI Only 6500 Miles

Here we are with a great Motorcycle for somebody, this is a great machine and with only 6500 Miles on the Odometer, this will be a great bike to take out  and enjoy the freedom of Two wheels.

I have changed a few things on this machine, to start off with, there is a set of Italian ZARD up sweep exhaust for that Road Racing circuit look, these are a super nice tone and stainless steel with Space Age heat wrap covering the header pipes.

I have made a Custom Union Jack seat and that has New foam too and very comfortable for them long journeys if you so wish to do.

 

Then I have added a New Chrome Grab Rail, just in case you are taking a Passenger or you can use it to hook Bungee straps to and carry things on the bike with no problems.

I Just fitted a Brand New Non maintenance Yuesa Battery to make sure everything is tip top and functions well.

Take a good look, this bike is clean, even under the fender its clean, a nice Motorcycle that I am sure the rider will get many miles of smiles with.

This bike is located in La Mirada and I have the title in hand too.

Drop me a line or a Dime if interested, great for any rider, from Novice to pro, this is a fun machine.

This is such fun to ride, I love the Triumphs for their reliability and looks alone, it’s a cracking piece of kit and am sure that you will have fun with it.

Thanks for looking and have a great weekend. You can call or even text on 714-598-8392. Or email me on carpy@carpyscaferacers.com

Price $5,500 and have Title in Hand.

 

 

 

 

 

TRIUMPH T100 Custom Build for sale

Here we have a really Clean and well maintained Triumph T100 that is one of our Club members, it has only 4,500 lovingly used miles and this is a dialled in machine that you just fire up and go.

5

No Bones about this bike, Tim put a lot of time. money and effort into making this Motorcycle stand out from the Norm, it rides well and handles even better.

tim

If you want a really well looked after and maintained Motorcycle, then look no further.

13

 

 

2015 Triumph T-100 Blk 4,500 miles

1

 

Bought New at So Cal Triumph as part of Custom line and upgraded by me with performance parts and many custom components and has extended warranty through November 2019.

8

 

Engine mods  

Air injection removed, K&N high flow filter with Motone Bellmouth intake, Carpy’s Café Racer Polished Stainless Performance Megaphone exhaust, remapped, 19 tooth front sprocket and trickle charger.

3

 

Handling and control upgrades

Tec piggy back rear shocks, progressive front springs, Pazzo shorty racing levers, Biltwell Kung Fu grips, Lossa clubman 1” bars and risers, Nolan bar end mirrors and Motone custom riser cover.

5

Custom features

10

Thruxton front fender, BC fender eliminator kit with LED taillight, bullet turn signals, Roland Sands Custom seat, Mule sprocket cover, Motone billet carb tops, Motone custom side panel covers, Union Jack custom gas cap, Motone light bracket and relocation kit and Carpy’s Custom Halo LED headlamp.

11

 

Extra take off parts

Original peashooter exhaust, side covers, sprocket cover, lever controls, headlamp and mounts, front springs and rear shocks.

4

Other items for sale separately, front wheel bike stand, riding jackets from Triumph (Mesh)

7

Soft ride too with the Roland Sand Custom seat with High density memory foam, your Arse will thank you for that later.

9

TEC Piggy Back shocks do take the Bumps out of the road and not your Sacroiliac.

12

A really well put together machine, super Low Miles and all the Bells and whistles to boot, now thats a deal right there.

6

If you dig this Machine, Drop a Dime to Tim @ 626-658-5701 as you will be impressed by this British iron steed.

tim2

Ride off into the Sunset today!!!

 

 

 

Canadian Norton Custom Brat-Scrambler is a real eye catcher.

When you think of Canada, I am sure you have passing images of Mountie’s, Moose, and the Stanley Cup in any order, well, we head on over to Edmonton, named after the City I was Born at in North London, this city has a huge passion for Motorcycles. You know when you are in that part of the globe when someone asks if you have a Loonie, you may think its a term of insanity ? Until you realize it is their Dollar coin that has a Loon bird on it.

Where’s the largest expanse of urban parkland in Canada? Nope, it’s not in Vancouver. Edmonton’s North Saskatchewan River valley parks system takes that title with a total of 7,300 hectares (you could fit about 18 Stanley Parks in there, if you squashed them). In fact, 20 back-to-back parks make up the system, which spans along both sides of the river (itself winding through the middle of the city), making this capital a whole lot greener and natural than you may have thought.

So, a perfect place for a bunch of lads named, Shaun Brandt, Randy Venhuis, and Justin Benson, of which formed their Custom Fabrication shop named Federal Moto, and a while ago turned out this amazing 850 Norton Commando.

norton-850-commando-2

They just wanted to try something a little different, and over in the MAPLE country there seems to be tons of Japanese Motorcycles scattered about like mattresses on the 5 Freeway here, so- they wanted to try and go with a little more Nostalgia, a bit of Brit style, seeing as a lot of their Dollar Bills still have the Queen plastered on them, they thought they would go an older style route and see what they can come up with using this old Commando as a build platform and a good challenge for these guys to see what their skill set level could accomplish.

I think many restorer’s will want to kick them right in the Rocky Mountains for cutting one of these Birmingham flyers up, but, on the other hand, there would be even more people loving the hell out of this unique machine and I for one am one of them. This is a killer looking ride that to be honest James Lansdowne Norton should of created as I for one would be all over one of these.

norton-850-commando-5

It takes way more thinking out of the box I believe, when you attack an Old Empire two wheeled machine and there will be many hours of head scratching and screwed up post it notes to even try to figure out where this bike is going to go creativity wise.

The Ace’ is a 1974 Commando that was discovered on a farm in Rimbey, Alberta, the bike did run but was about as reliable as a BSA, but the bike already had a hearty attitide and the look that the team of builders were after seemed to steer towards a Brat- Scrambler, a cool bar Hopper with an old look that could be ridden to the beach or up into the Mountains and handle the terrain with ease. So it was decided that this was the route to take, they wanted to keep the heart of the bike, the Motor, as it was from the Factory in 1974, but the rest was all up for ideas and changes and so the Journey began.

norton-850-commando

As the Idiom states, – Mighty Oaks from little Acorns Grow- and this was certainly the case with this 850cc Steed.  The Bike was stripped faster than a Crook being caught at the Border and before they knew it the Skeleton of the Commando was staring right at them, but that frame? It has the thick center seam that all Nortons are known for, this really needed to be thought out as a back bone such as this would spoil the lines of the current project, so some major engineering calculations was required to be able to pull off something that was aesthetically on the money!

Running out of Cigarette packets to draw on, they had to come up with a workable conclusion, somewhat flustered and tired, these guys managed to come up wit a very cool modification that not only gave the lines of these machine a more elegant style, but it kept the rigidity that the original was designed to do. the frame was actually shortened by 18 inches or 457.2 mm for the Metric fans out there.  Then a 1 inch -065 wall cold rolled steel tube was hand bent to make the hoop to tidy the back of the frame up and the beginning of this Brat-Tracker motorcycle was now well underway.

norton-850-commando-4

Also there needed to be what is known as an equilibrium , which in layman’s terms is ;

A state in which opposing forces or influences are balanced.
“The maintenance of social equilibrium”  Balance, Symmetry, Equipoise, Parity, equality and Stability.-

They pulled that off by going for a set of 19 inch rims and shod with a set of Vintage styled Coker tires and I have to agree it does look the Status Quo.

norton-850-commando-6

The frame had all the tabs, brackets and nick knacks that were not going to help the machine handle or go faster, cut off, then sanded to a smooth finish, and Powder Coated Black, the bike actually had about 30 pounds or (13.6078) Kilograms removed, so now this Norton will feel so much better in the bends.

For a stylish look, a 1971 Oil tank was located and brackets were fabbed to make sure that this fitted like a factory piece, then a seat pan was hand cut, rolled and shaped to engulf the chassis with a Historic style that even the restorers may even crack a smile too.
Such neat lines on this Motorcycle.

norton-850-commando-3

The Mudguards are mid-50s Triumph items rescued from a junk pile, reshaped and finished in matte black and the exhaust system was another great little detail of which they located a set of 1971 Commando SS pipes and then removed about 12 inches from them and added an Old style reverse Cone Megaphone Muffler to give that Olden days gone by feel and of course sound.
norton850

The Motor itself was not bad at all, considering it had sat around for some time, but none the less, you go this far, well, in for a penny right?  So Federal pulled it apart and inspected, cleaned and polished everything. They got the valves dialed in, bored the pistons, and replaced the piston rings.

“Well worth it, considering it’s got even more compression than an industrial trash compactor!”

Salvageable parts were sanded and polished in-house, with replacement items sourced through local guru John Oland. “This build would not have been possible without John’s willingness to share his knowledge of vintage motorcycles. The guy is a legend,” says Brandt..

norton1

Small bullet style turn signals were chosen and kept as minimal as possible, anything with switches, as old Brit handlebar controls were big and bulky, so they chose to go with another route and drill and fit small Micro switches and this is so tidy and looks a Million dollars. With a reworked wire harness, and a 5-3/4 Bates style headlight that was fitted as low as possible, gave this 2 wheeler a real classic stance.

Norton-850-Commando-By-Federal-Moto-3

Using a small anti-Gravity 4 cell battery, kept the bike away from any Bulky items and was placed neatly under the seat unit,and helping the steering, a super Low set of A10-A65 bars were placed on top of the yokes.

Another neat touch was the grips, as they were purchased from Tommaselli in Italy and used the Natural Gum series , a good choice.

norton3

Federal wanted to keep some of the original parts on the bike and the rear Hub was left stock, refurbished and painted but up front was a slightly different story-

They figured out a Tokico two-piston assembly and a Katana 750 rotor—machining a new mounting bracket for the forks.

And now this Norton will do like many do not, and thats stop, real quick!!!!

Federal Moto - the Ace - Ride 001

I personally like the 2 Tone leather application to the seat pan, that really does give this creation a touch of Elegance and form, and I take my hat off to that, although the rear mudguard is short.

It will stop the road grim from sending a line up your back but it may build up behind the motor as there is no guard liner, but looks great none the less.

The Gas tank was painted an off White and the famous Gold logo was added to give the bike its Original Brand back once more.

Norton-Commando-Tracker-Seat

A super fun machine that if you secretly asked the old boy restorer’s,if they would dearly like to ride this around their town? I am certain.

They would be nodding their heads in excitement as it looks like a fun machine that Mr Norton should of had a go at manufacturing and with that I leave you for today and hope that this December day this Blog gave you a little bit of Summer and inspired you to get in the garage and have a go on your Motorcycle.

Federal Moto - the Ace - Ride 001
Blogs take me quite some time but I am sure that some of these will get some of you out there, all fired up to create a unique creation that you can be proud of and show people that this is what turns your dial too.
Thanks again for reading my Blogs at Carpy’s Cafe Racers and, if I can help with parts to full builds, just let me know OK.
Safe riding.
Peace & Grease
Carpy
714-598-8392

BAAK MOTORCYCLES CUSTOM TRIUMPH BONNEVILLE T120

 

THE TRIUMPH BONNEVILLE T120 More fun that watching a dozen frogs in a Fly factory.

The Triumph Bonneville T120 made its debut in 2016, the motorcycling world had been expecting some big announcements from Triumph so it wasn’t a complete surprise, but the T120 was perhaps a little more than most were anticipating.

baak3

At its heart the Bonneville T120 is fitted with an all-new liquid-cooled parallel twin with a SOHC, 8 valves, a capacity of 1200cc, a bore / stroke of 97.6 mm / 80 mm, a compression ratio of 10.0:1, multipoint sequential electronic fuel injection, and a 270° crank. There’s 79 bhp (at 6550 rpm) and 77 lb-ft of torque (at 3100 rpm), fed to the rear wheel via a 6-speed gearbox and an X-ring chain.

baak18

Reviewers overwhelmingly loved it. There was a clear and distinct improvement in build quality throughout, and rival motorcycle manufacturers like Harley-Davidson, BMW, and Moto Guzzi had been put on notice.

BAAK MOTORCYCLES

baak16

BAAK Motorcycles was founded in Lyon, France in 2012 by Rémi Reguin, it’s since grown to employ five, and the company enjoys a global reputation both for their custom motorcycle builds, and for their in-house developed motorcycle parts for Royal EnfieldMoto Guzzi, and Triumph.

baak15

THE BAAK MOTORCYCLES BONNEVILLE T120

baak5

The new T120 is the current motorcycle of choice for BAAK, in fact they’ve probably built more customs using it as a platform than any other garage in the world. They built this bike for a customer in Spain, his main request was to use a British Racing Green on the fuel tank, as a hat tip to the cars of his childhood.

baak6

British Racing Green, commonly abbreviated as BRG, is a perfect color for a British motorcycle with heritage like the Bonneville. The team at BAAK matched the fuel tank with a medium tan leather seat, side bag, grips, and gators, with brushed steel knee-indents on the tank.

baak7

The plan was to lower the bike a little and tighten up the handling, so a pair of Shock Factory -20mm shocks were fitted in the back, and a machined aluminium flat triple trees were fitted up front to proportionally lower the front end.

baak8

A new 16″ rear wheel was installed and both ends were fitted with Avon MKII tires, giving the bike and vintage look with the benefit of modern tire compounds. A MotoGadget ChronoClassic dial was fitted carefully into the back of the headlight unit, a nice reference to instrument fitment on vintage British motorcycles, and the team at Baak are currently working on a plug-and-play system for others who want to replicate the look.

baak10

The original handlebar was swapped out for the Baak N°1 wide stainless steel unit, with machined aluminium handlebar clamps, and a mini brushed stainless steel rear mudguard with license plate support – significantly better looking than the factory fitted unit.

baak20

Up front theres a longer stainless steel front mudguard with aluminium supports, Mini LED blinkers from Motogadget, a Monza-style gas tank cap, Beringer Aeronal front brake discs, and proper mirrors left and right.

baak21

The completed bike is a tasteful custom, Bobber-like in some respects, with combined British and French heritage, and a future that will be based in Spain. Also this is a very unique machine and wanted to share this with you as a blog today on my website. www.carpyscaferacers.com

baak12

It takes a lot of thought and sketches before you even come close to a final phase drawing of how you want a machine to look and also, the budget of the customers is a huge part of any project, but this time, the froggies got it right on the money.

baak9

So as I close this for Thursday, hope you all have a great day, the weekend is not too far away now and I know you are itching to either ride your 2 wheeled machine, or jump in the shed and start wrenching to produce your own creation.

baak

Thanks for stopping by and if I can help with anything for your machine, even if it is advise, I am here. 714-598-8392 and you can even Text me on that to save more time too.

baak3

Right I am off to the shed myself as I am building a project, so, as the Terminater used to say.          ” I’ll be BAAK”

 

 

Totti Motori is a great builder from Italy

Roberto Totti of Bologna is one of Italy’s most prolific custom bike builders, and he’s been getting a lot of attention lately on the interwebs. One of his latest motorcycles is the 1508 Hot Rod, inspired by American custom cars from the 1960s. (The 1508 comes from the date the frame was built, 15 August.) The 750cc engine comes from a Triumph T120, with the head apparently turned 180 degrees to maintain pressure in the carburettors.

Triumph-Bonneville

 

The Bonneville T120 was Edward Turner’s last production design at Triumph (in retirement Turner designed the Triumph Bandit/BSA Fury which did not pass the prototype stage before BSA went under). The new motorcycle was conceived and developed so quickly that it was not included in the 1959 Triumph catalogue. With a 649 cc (39.6 cu in) parallel-twin (two-cylinder) engine the T120 was based on the Triumph Tiger T110 and was fitted with the Tiger’s optional twin 1 3/16 in Amal monobloc carburettors as standard, along with that model’s high-performance inlet camshaft. Launched in 1959 by Triumph as “The Best Motorcycle in the World”, the Bonneville T120 was aimed mainly at the lucrative US market where enthusiasts were demanding extra performance.

Initially produced with a pre-unit construction engine which enabled the bike to achieve 115 mph (185 km/h) without further modification, the power tended to induce high speed wobbles from the single downtube frame,so in 1963 a stiffer and more compact unit construction model was introduced, with additional bracing at the steering head and swinging arm.The steering angle was altered and improved forks were fitted a couple of years later, which, together with the increased stiffness enabled overall performance to match that of the Bonneville’s rivals.

 

In 1967 Triumph posted its most successful year in the United States with an estimated 28,000 T120s sold,.In 1968 the T120 gained a new and more reliable ignition system. From 1971, T120 models used a new frame which contained the engine oil instead of using a separate tank (this became known as the oil in frame/’OIF’ version). A five-speed gearbox finally was fully available by 1972, but competition from larger-capacity motorcycles led to the T120 being superseded by the 750 cc Bonneville T140.

Production of the 650 continued until 1973, when the workers at Triumph’s Meriden headquarters staged a sit-in until 1975. In 1974 fewer than 1000 of the 650cc assembled machines were released by the workers, with another 38 in 1975. Production of the T120 was not resumed following the sit-in, the Meriden Motorcycle Co-Operative created after the dispute concentrating upon the 750cc twins instead. In the Harry Potter Films,on was used as Rubeus Hagrid’s’s Flying Motorbike.

totti2

This sure is a classic look yet so different to many out there. Below is yet another style.

totti4

 

Looking forward to seeing more of his creations.

11225432_1733972060164852_1478998756512814883_n