Have a Question? Call 714·598·8392

Many people ask me about my choices of rear tail light and there are a few that I love to use, this one below is just Pure Class and now offered to you.

Take a look at this nice medium weighted Chrome rectangle L.E.D. tail light assembly, this is a brake and running light and so easy to wire up and use.



Dimensions are: Length 5.25 Width 1.75 Depth 0.75

This is now available to you and so easy to fit as it uses just a couple of M4 studs and 2 hex nuts and you are done.


This is real Quality and being LED these are not going to burn out like a regular 12 volt Bulb does and you will get many miles of smiles from this set up.

Just have a look at the lovely detail on the tail light Bezel, it screams Nostalgia in every way and angle and has that almost deco look to it from the 1920’s.


I have used a few of these and they really do look Vintage but also are brighter than a Harvard student so you know that you get noticed when you hit the rear brake and that light glows like a nuclear explosion.

This is simple to wire as you have running light, brake light and Ground, that’s it and you are good to go, no messing about and this really is bright to see.

The unit is immersed in a Lucite body so the LED’s stay in place and nothing moves, modern lighting with a Classic look is a super style set up.



 Just use the Rubber backing as the template for the holes to drill, I would tape the rubber backing to the area that you want to drill, then use a 1/8th inch drill bit and go through where the holes are in the rubber, then once that is done, just maybe a 1/4 inch hole in the center, for the wiring to fit through and that’s it.



This will take less than 5 minutes to fit to what ever you are applying it too, but if you are fitting it to a HONDA then just connect the Black wire to the Brown.

Then the Red wire to the Green with the Yellow stripe.

Then the White to the Solid Green and that’s it, you will have a bright tail light and a super bright stop light and the rear end will really look the part.

So have a look and see what you think as this is a great light for your buck.





Weight 1.0 lbs
Dimensions 9 × 5 × 3 in


There are no reviews yet.

Be the first to review “L E D Finned Rectangle Tail Light”