My 1928 FORD AV8 Roadster

Posted on July 13, 2018January 30, 2020 by Steve Carpenter

13 Jul

Well, Hot Rods really are never finished, you just continue to wrench, change looks and idea’s etc and thats what I love about Hot Rodding, My 1928 Ford Roadster is no Show ride, it is no super high Dollar Performance machine, nor is it a trailer Queen either.

What it is, well- To me anyways, is a Nostalgic styled AV8 Hot Rod that you would of seen on the streets on Southern California back in the late 1940’s.

It is something I really have a passion for since I was a Teenager. lucky for me I had a Three Window Coupe in the UK but my Dream was a Roadster and to have one in California, so dreams do come true and wanted to share my little Model A machine with you.

This is a real Henry Ford Body and Chassis, and the stance I have as you see it here is right on the money, have a look at many Vintage pics and you may see a late 1940’s Roadster similar to mine, I wanted to keep the Side Aprons on, these are the step covers that your fenders bolt to. Below is Jack Mickleson’s Roadster in about 1942. I think it was the last dry lake run before World War 2 was underway, I believe Don Francisco owns it but have yet to see if this Roadster survived.

Back in the day, the Hot Rodders would drive to the Dry lakes such as Harpers, Muroc or the famous El Mirage and then strip the fenders and head lights off as well as the windshield and then see how fast they could run on them dried out lake beds.

This is how she is right now, still may change a few little things and then fine tune all the time, I am hoping to eventually Louvre the front hood and the rear Rumble Seat lid.

I used a Genuine 1932 Grill and Shell and fitted the Model A Hood to it with Old style belts, then used one of Limeworks Stainless Steel dropped headlight bars with stock Model A Lights.

Shorty shocks up the front soak up as much as possible, dropped I-Beam front axle sits this front end just how I want it , I then made a Spreader bar to complete the Nostalgia going.

Not as powerful as the locomotives behind me but eventually I shall build a Hopped up Flathead for this Jalopy, right now it has a 1939 24 stud mill with Edelbrock Heads.

I shall be shortening the exhaust pipes, I did have the original Bumpers on there when the exhaust set up was made, but shall cut them back and may make a Nerf Bar for the rear.

She is sat on a set of Kelsey Hayes wire Rims with Vintage style Firestone 16 inch tall tires and it is fun to drive, she tracks a little on the freeway but thats the feel I wanted.

I have a chopped Stainless Steel windshield, another common touch that was done in the day and of course sit lower now else my head would sit up too high. LOL

it is always fun to take out, this place isnt that far from me and wanted to try and take some decent pic’s, im no pro at this but I am really happy at how these came out.

She runs stock pistons but New and right now a stock cam, later I hop to build a little growler motor that has an Isky Cam, just to get me out of trouble if I need it.

Plenty of old freight train and shunting lines around where we live and whats great is to think about 70 Years ago, this was full of Dairies, fruit trees and Flathead Motors.

Sadly, more common than not, all you will see these days is Graffiti, personally not a fan of it at all, but as it was close to the color of the Roadster, I thought a photo Opportunity awaits.

One hauls freight and the other hauls Arse!!! LOL!

Sat patiently awaiting me to jump in and stamp the right pedal and head back home, so much Hot Rod History in and around where we live in La Mirada.

A great ride and more to do, I have a Columbia 2 speed rear end for it, but have to send it away to get Bullet Proofed, not cheap but that will give me a good overdrive.

Long way to go as I would like to have Oxblood Leather interior, but for now this old Naugahyde will suffice as leather is not cheap.

Hot Rods and Trains have always gone together like peanut butter and jelly sandwiches, Hot Rods use to try and race the train if there was a good straight away.

VHRA Vintage Hot Rod Association of which I joined in the 90’s back in the UK, huge part of my life to be honest and going so strong there today.

I shall always keep this Roadster, I drempt about one as a kid and here I am 5400 miles away and living that dream , totally amazes me sometimes and have to pinch myself.

I have always liked vintage stuff, be it Hot Rods, Motorcycles, Juke Boxes, Chris Craft Boats, Spitfires, Hurricanes, Thunderbolts to Dakota’s, Vintage is in my blood I guess.

Hope you like my little 1928 AV8 Roadster? I really have fun with this and enjoy the experience of feeling what a traditional Hot Rod feels like to drive and work on.

Maybe some of you can relate? As I have spoken to a few people that have Motorcycles and Hot Rods, it is a fun and to me, a therapeutic Hobby.

I will still be working on this for many years but enjoying what i do, some things work and then sometimes they dont but, mechanical parts are great to work on.

I shall be selling Hot Rod parts and Apparel so will be revamping the website a little, stay tuned to the site if you want to see what I do to this Model A Roadster of mine.

Thanks for reading my Blog today, I enjoy doing it and people often email me to say that they like looking at what I am up to out here in La Mirada.

Let me know if you have a cool ride, love to see what you are creating and of course having fun in these days, I always have a smile on my face driving the Roadster, sometimes bugs too.

Have a great weekend and enjoy life to its fullest.

My 1928 Roadster

Posted on July 27, 2016January 30, 2020 by Steve Carpenter

27 Jul

Well, here it is, my 1928 Roadster, with a Flatty hooked up to a 1939 Box. But, it needs some work and over the next few weeks, I hope to have this running well and driving down the road.

I shall be changing this to a more traditional AV8 Roadster of the era I really love and that’s post WW2, I will be selling the top and making a lower version with chopped windshield too.

I am looking forward to changing the look and this is pretty good shape too, even though it is cool, there is a lot of re-work that has to be undertaken.

There is the beloved flathead, the very first V8 came from ole Henry Ford himself, but the Motor sits too far back so need to move an inch and half forward to make it right and no vibration.

Below is a list of things that this A-Bone already has. But the note to the side is what I am changing.,

1938 v8 motor late 24 stud
39 rebuilt trans
40 ford juice brakes front and back
40 ford master cylinder
New hoses and plumbing
New shoes and cylinders
Edelbrock polished intake
Edelbrock Aluminum heads
Original A radiator modified – Changing to a Original 1932 deuce grill shell and insert later.
Rebuilt generator – Its junk so I have purchased a Powergen.
New Distributor
New battery – Battery is only 6 volt, so converting to 12 volt. And repositioning .
Original model A dropped axle
Original banjo rearend- been gone through- The Banjo is going to be changed for a Columbia rear end I have.
Rear drum locks
Original model A Steering column- Pulling that out and fitting an F1 steering box.
Stromberg 97 carbs only one hooked up
Electric fuel pump
6volt – Am changing over to 12 volt.
New cloth spark plug wires with rajah ends
1935 Wire wheels
New 1934 v8 caps
New Firestone bias plys
Original unsplit bones – Rears will be getting 1936 Radius Rods.
Slanted windshield- Will be replacing with a 2 inched chopped windhsield.
New Smithys dual mufflers- Replacing with Race headers and New pipes.
Original Points ignition

Limeworks 40 Ford steering wheel.

New X member and re worked pedal assembly.

The electrical is a disaster, the guy who had it did a terrible job and I am having many power issues now and am trying to source the issue as this is still a 6 volt system, so nothing wants to turn over long else the battery will die. This is all going to change as I shall have it converted to 12 volt as it makes for far more easier starting and can see at night with no dim Glow from 6 Volt bulbs.

This will still need a ton of work and I hope I can get there soon as I want to be able to drive it in the next month or so as I love the look, just mechanicals need sorting.

I shall be fitting a 2 inch chopped windshield and later get a chopped top for it and of course I will lower the seat a few inches to allow for that.

Above will be the New X member that will be going in place of the shoddy one some fella attempted at welding in with some cheap stick welder, so this is going to be gone through and make sure all is safe and strong, as my Girlfriend will drive it too and need it to be roadworthy, right now I have a few issues to get ironed out but will get there bit by bit.

The Motor is now going to be moved forward, as well as the rest of the running gear, the Muppet who originally fitted the flatty put it back too far and the motor was pushed against the firewall.

Takes time, Money and Patience but I shall be keeping the Roadster in memory of my dear MUM.

I will run with No bumpers later and will also be taking the A-Bone Radiator and Shell out, and replace with a genuine 1932 Grill shell and insert as I have always loved that look.

This will be such a fun Hot Rod and dream of the day I take it for a run across El Mirage dry lake later on, as thats been a dream for so many years.

Above, 1936 Rear Radius Rods, these will be fitted to my Model A to give it much added strength for the V8 Flatty Motor.

Later on I shall be making this 1936 Ford Dashboard, fit the 29 Model A Gas tank, as I love this Post war style that was popular in Southern California back in the day and will simply swap out once painted and gauges fitted etc, but that’s a little later on down the road, but exciting stuff none the less.

I want to make sure this A Bone is safe and with a X member I know the chassis wont be flexing as much, as I have seen so many crack over the years on the shitty roads we have here in California as the freeway beats Hot Rods up for sure.

As you can see, the body had to come off for a number of reasons, and one was to move the engine forward and secondly to be able to fit the X member and over riders correctly, glad we have got to this point,

A better solution than the crap that was one there before, and also Bungs were welded in chassis to make fitting Roadster body easier.

Up in the air and soon to be laced back on the strengthened frame and I will be feeling a lot happier for that.

Flatty Motor is a 24 stud 1939 Era with Edelbrock heads and intake with three 97 Strombergs, The Radiator fan is now replaced with new bearings too, and the 6 volt system has been removed and 12 volt system now lives there with a one wire powergen to make sure I have plenty of electrical Voltage.

My 28 Roadster Body is in pretty good shape, Later on i shall be replacing the gas tank with another as I will be fitting a 1936 Dash in the old gas tank area.

Looking forward to when she is sat back on the rails and can get on with a few other things as she will be having 1936 Ford wish Bones on the rear and I have a 2 inch chopped stainless steel windshield to fit, along with a 1948 F1 steering box with a Limeworks 40 Ford style steering wheel.

The 1936 Rear Bones were cut and shortened and the welded and will make a big difference in the Rigidity on the rear end for sure, as this is a proven Formula from back in the day.

The complete X member kit is now in place with Boxing plates and this really is a good thing for me as I will feel a lot safer, I have seen many stock Model A frames that have stress cracks as they fitted a Flathead and the power does cause a lot more stress on the chassis, this was a Hot Rod Fab back in the day too.

Well, the stock winshield posts have gone and now a 2 inch chopped Stainless Steel set up is in place, looks way better now and am stoked to have it on the Roadster.

The Body is about to be plopped back onto the rails, all the old nuts that sat under the frame have now been replaced with threaded bungs, so no more struggling to hold the nut with a wrench under the chassis.

Now I have the 1936 Ford rear Radius Rods in and the Handbrake cable from 40 ford to Model A in Place, things are getting closer to be finished.

Slave cylinders are all good , as is the brake shoes etc, bit of adjusting to do but on step closer to getting her ready for a road test.

New fuel line will be added to the pump, filter and to the Strombergs.

New OEM 1939 Fan assembly but with New bearing and to help with Battery, a New Powergen, this goes from a 6 volt ride to a 12 volt.

Limeworks 1940 Ford steering wheel will be fitted to the F1 Column I have and wil be smooth to turn now, before, the notchy A Bone Column was a nightmare.

I shall keep the Model A Grill shell for a little while but have a genuine 32 one to replace it.

Reworked Model A pedal assembly will be fitted today, then the handbrake will be made to fit the 39 gearbox and a New floor to be added too.

Bit by Bit she will get stuff done, wont look much different but will handle so much better than it did when I first got iy.

Hope you like how she is turning out, this is something I shall keep as it is in memory of my Dear Mum!

Steering Column is in, just needs the tube cover to go on but it looks the right height, although I want to lower the seat somewhat.

I am glad how everything is working out as this needed a lot of work that someone had thrown together badly.

I have a Limeworks Steering wheel on that F1 Column and it looks great, great value for money. Also fitted 40 Ford pedal tops to Model A pedals.

Looks great in Black and White photo and wont be too long now before I can have a test drive.

Next up was to make a handbrake for the Rod, as there was not one in it at all, so a hunt for a few parts was needed as this A Bone now had Juice brake, lucky for me I located the handbrake, the wires and attachments as I need to be able to have a handbrake in this Jalopy.

Sat back on the floor for some more work, wiring needs to be addressed and as she is now 12 volt, make sure the bulbs are changed in the 6V lamps etc.

Bit more done but the battery will be repositioned, then, new wiring as well as securing the F1 steering box and fitting new switches for fuel pump and ignition etc.

Up next was some floor work that needed to be rectified , as the original is just wooden and I did not want that, this body is now sturdy to the chassis since the X member kit was added, and the doors will not pop open like many stock version do when the Ford goes up a drive way hill or a dropped kerb etc.

These are hand rolled and sure look nice in steel rather than ugly timber.

You can see that the Model A pedals have been reconfigured and now have 40 Ford tops on them.

Feels more like a Hot Rod now, rather than a Resto and will not be long until I can test drive her.

The Motor now runs and is smooth, only running the middle Stromberg right now but hope to use all Three later on once all the bugs have been worked out, straight through pipes for now until later in the year when I remove the fenders and run as a high boy and will use 1936 Torque Tubes for the headers like they did back in the Dry lakes days.

I am so glad that she is running Now, sounds quite smooth now that is fitted with a New Old stock fan and as she is turned from 6 Volt to 12 volt, she will fire up a lot easier and no more dim headlights.

Well, time has just tocked on a few days and I am glad to say I at last got the chance to drive it for the first time yesterday, mind you it was 100 degree’s outside.

Sitting pretty, this was a big moment for me, I dreamt of having my own Roadster in California for ions, and now here I am and its great.

She sits well but have to tell you, the rear shocks are shot to bits, so I will need to find some slightly longer and robust versions, maybe Pete & Jakes, but have to weld on shock mounts as the person before set these up for standard car shocks with no clevis at the top, but that’s all repairable and even though it bumps pretty hard, its so much fun.

I am happy at the style right now as I parked it outside my Motorcycle shop in Anaheim, it was 100 degree’s but I still drove it around and smiled all the way.

I will eventually remove the fenders and grill and fit a Genuine 1932 Grill shell and change lights and that is what Hot Rodding is all about.

Looks way better with the 2 inch Windshield chop and eventually I will get a retractable top but not just yet, but- I do need to cut the seat riser down about 4-6 inches I think.

The seat is Bone stock Model A and I sit too high, but I will try and locate another seat Riser and channel it a few inches to sit lower and have that early look too.

The flatty runs pretty good and right now, just on the middle 97 Stromberg but hope to hook the other two up at a later stage, once I have worked all the bumps out.

Having a bit of fun with a 1956 Flying Cloud Airstream,as these are the coolest trailers and easy to tow because they are so light and balanced well.

Yes- reverse does work and had to get used to the old style clutch pedal and it worked really well indeed on this AV8 Roadster of mine.

This looks like back in the day as I put it in Black and white, Classic lines and thought I would share with you.

Eventually I will locate a 1940’s trailer and be able to tow it to the dry lakes.

My Girlfriend loved it, it was fun driving it on the road for the first time, albeit 100 degree’s out and I live about 13 miles from the shop, so as I pulled into our street the radiator started to puke hot water out of the top cap, but that’s to be expected from the summer heat. All was good later on in the evening when I drove it around the block with Jen to try it out.

I have more plans for the Roadster, I will change the Radiator and the grill shell for a 1932 version and will remove the fenders too, then use 1936 Torque Tubes for headers and run them out the sides for an older style of Hot Rod, the car is always an on going challenge but that’s what Hot Rodding is all about.

So stay tuned for more on my 1928 Roadster…………………..

So now its time to get a few miles on her and work all the bugs out of it, that all takes time, money and patience.

MY Hot Rod Heroes

Posted on May 17, 2016January 30, 2020 by Steve Carpenter

17 May

There is so many Iconic Builders, designers and owners or creators of Vintage Hot Rodding, it would take so many volumes to fill, but I am going to do a few of my own personal favourites of Hot Rod Royalty that inspired me when I was a kid and, 9000 miles away on a little Island you call Great Britain.

I was lucky enough to get my hands on Hot Rodding magazines in the UK in the late 1970’s and, living nearby all the old ww2 Bomber and Fighter Airfields, I felt a strange Euphora over WW2 American planes, Post war Belly tanks and of course Hot Rods.

I had my own 1932 Three window coupe in England and lived the American lifestyle and yearned to make that crossing to the United States and actually live my Dream, and here I am and live it every day.

So, one of my Early influences to this crazy Hot Rod fraternity was this Bloke- Dick Scritchfield.

THE DICK SCRITCHFIELD ERA
Dick Scritchfield has had a long and illustrious career in hot rodding. Yes, that’s right–career, being involved most of his adult life, both as professional (speed shop owner, the first NHRA Regional Rep, and Safety Safari participant, Associate Editor of Car Craft, and Advertising Manger at Rod & Custom), just to name a few, all the while actively participating as a hobbyist as well.

In 1944, as a lad of 14 living in Missouri, Dick purchased his first car, a ’29 Model A coupe, and was granted a valid driver’s license. Other cars would follow, with his first Deuce (a Sport Coupe) acquired in Washington, D.C., while he was stationed there as a drummer in the Navy, which he joined in 1948 (Dick is still a percussion instrument kind of guy). Dick went on to be stationed in Puerto Rico, where he cruised in another Deuce, this time a five-window, which was the only hot rod on the island. As Dick was one of those “hot rodders,” he was asked by the base brass to organize a drag race to keep the sports car guys (both enlisted and locals) from racing on the streets, where there had unfortunately been a few fatalities. Can you imagine for a moment that it was the sports car boys who were the ones they were trying to get off the streets? Dick eagerly complied, then promptly kicked some serious sporty car butt with his fender-free and channeled Deuce coupe. It was also while in Puerto Rico that Dick became a partner in a garage where he honed his bodyworking and painting skills during off-duty hours. He would later return to the island after his tour of duty, where he and his partner imported speed equipment from the States and performed engine swaps. However, as he was already an NHRA rep by this time, he returned to his new rodding career Stateside, moving to SoCal in ’56 to work at NHRA headquarters. One day Dick chanced to see a great looking yellow Deuce highboy roadster for sale in a gas station and acquired same forthwith. Now if you guessed it was Bob McGee’s roadster, you’re correct.

If the roadster had been both daily driver and race car to Bob, Dick added yet another element–movie and TV star. The “B” movie producers were always on the lookout for prop cars that screamed “HOT ROD!” and were willing to pay good money to rodders who wished to supplement their incomes by renting them to the studios, as evidenced by Norm Grabowski, Tommy Ivo, and numerous others. This concept wasn’t lost on seminal L.A. Roadsters member Dick, and soon the Deuce was involved in all kinds of socially inappropriate automotive hijinks on the silver screen. Dick, Tex Smith, Tony LaMesa, and other roadster owners decided a club dedicated to topless motoring would not only be fun, but give owners of such cars a responsible, public image as well. So, on one fateful Spring day in 1957 (A Sunday afternoon to be exact) the first formative meeting was held at Weiand Equipment Co., where Dick was voted President, and awarded membership card number one! His roadster went on to appear in such flicks as Hot Rod Gang, Hot Rod Rock, and other, more forgettable films as well. The now Scritchfield roadster (he owned it for some three and a half decades, 1956-90), also appeared on movie posters and lobby cards, album covers, and in many magazine how-to articles as well, making it one of the most visible public representations of the hot rod esthetic of its day. It also appeared on television shows like Dragnet, The Many Loves of Dobie Gillis, The Real McCoys, 77 Sunset Strip, and of all things, The Lawrence Welk Show, serving as a hot rod stage prop for the Lennon Sisters, which showed rodding’s more acceptable side to the “Geritol Generation.”

Over the years the ’32 was subject to many mechanical changes (flathead exchanged for 283 Chevy small-block, etc.) and cosmetic changes (first non experimental Metalflake paint job in 1960, which was the subject for a breakthrough article in Hot Rod, inspiring a young Jerry Weesner to do likewise with his own set of wheels, a ’48 Ford convertible). Dick would then build, with Dave Carpenter’s help, a 350cid small-block Chevy that would carry the roadster to a two-way average of 167.212 mph at Bonneville in 1971, with full street equipment. He not only set a record (C/STR) that would stand for a number of years, but the car was given the enviable title of The World’s Fastest Street Roadster as well. In a recent conversation with Dick (who now resides in Hawaii), he disclosed that he would drive the roadster on the street equipped just as it had run on the slat, so the title was both legitimate and well earned. And by the way, those over-the-frame headers that Dick ran and nobody could ever quite seem to identify, were Sanderson Chevy marine items turned upside down.

To backtrack just a scoach, in 1964 Scritch had it made, sharing a bachelor pad with fellow L.A. Roadsters’ member Sam Conrad, had a garage full of roadsters and parts, and a new position with his then employer, the Auto Club, where he had been transferred to the Claims Division. When our boy was introduced to his new secretary, one Marian Wilson, that was it–love at first sight! So what did our young couple drive on their honeymoon? If you guessed the Deuce, you’re still in the ballpark.

When Scritch finally retired to Hawaii around a decade ago, Marian restricted him to only taking some half-dozen vehicles with him. So, with all kinds of motorized transport to choose from, including a Deuce Phaeton he built while at Car Craft (and which he still regularly drives), the roadster was put on the block, as Hawaii still had those pesky fender laws (which varies from island to island), which had caused Bob McGee to sell the roadster all those many years before as well.

An Icon and always will be.

Photos taken from Internet from Rod & Custom, HAMB and google, please let us know any other credits so we can show the people who took these wonderful shots.

GRAND NATIONAL ROADSTER SHOW THIS WEEKEND.

Posted on January 29, 2016January 30, 2020 by Steve Carpenter

29 Jan

On Sunday, Jennifer and I will be attending the Grand national Roadster show, of which I was lucky to WIN trophy’s Three times for my Cafe Racers, but, I have always been into Hot Rods and back home in the 80’s I had my very own three Window, chopped and channeled 32 Coupe.

Well, I now have a stock 1929 Model A Roadster, More Rust than I really had thought and needs a total strip to the frame and will fit a flathead etc and what I have been looking for is a cool color, I love Black but many out there, I love Blue but built a 29 Roadster in early 2000 and that was Blue.

This was a great ride but had to sell it when bills at the house got out of control and I sold it and it ended up in Japan where it still is today.

I am hoping to get the Roadster into a Vintage style by Next year with any luck and of course, in Memory of my Dear Mum of which if it wasn’t for her, I would not be here.

So I have been looking at Car shows with Jennifer and of course any where I see a Color that jumps out at me to try and think of what would look great on my Hot Rod. Jennifer and I both thought a WW2 style Green would be different then I saw a buddy I know has just completed his 32 and painted his Green, and this was the color I looked for over the months, so may have to go a little darker, but this 32 Roadster is so nice I had to share it with you all. I love this Hot Rod and am sure you do too.

This weekend and Its going to be a super show with many cool rides for everyone.

Mine will never be as cool as this but will have fun with my ride for sure so, wish me luck.here is mine right now. she needs tons of work but it will be a fun machine later.

Below is what HOT ROD wrote about this super cool set up and I wanted to share this with you today, if you are at the GNRS on Sunday drop me a text or message as I shall be there with Jennifer and would be awesome to see you.

Some of the best advice a father can give to his son is the phrase: When you want to learn how to do something correctly, watch a professional do it. The “right way” is nothing that can be taught by reading a technical book or even watching a YouTube video, but rather hands-on immersion and a learn-by-doing mentality.

Darryl Hollenbeck, a 48-year-old automotive painter who grew up in Concord, California, had a distinct advantage when it came to learning his craft: his grandfather, uncle, and father were all car painters, with Dale (Darryl’s dad) carving out a respectable niche in the custom car world before he died in 2003.

Now known as the “go-to” guy in Northern California for many of the country’s top rod builders, Darryl’s paintjobs have been found on an America’s Most Beautiful Roadster award winner, dozens of STREET RODDER and Rodder’s Journal cover and feature vehicles, and well as a handful of Pebble Beach Concours d’ Elegance show winners.

But Darryl’s approach to all these cars is the same: it’s all in the details. As owner/operator of his Vintage Color Studio in his hometown, Darryl usually works by himself, perfecting any given body long before the color ever leaves his spray gun. But he’s also a car enthusiast and, after working on dozens of vehicles over the years, he really wanted a hot rod for himself, but time, the job, and money always seemed to get in the way. He did get close a few years back, starting a 1932 roadster project, but he ended up having to sell the car well before it got finished.

Recently Darryl’s friend, Brandon Flaner of East Bay Speed & Custom, told him about a project that someone had lost interest in. It was another Deuce highboy roadster, with a standard street rod build started but not finished. Darryl bought the car but soon realized, considering his workload, this one may not get finished either.

As fate would have it, one of the cars slated to roll into Vintage’s paint booth was a Deuce highboy from Cory Taulbert. The Michigan native is a part-time rod builder and married to the former Ashley Webb, she’s the daughter of fabricator (and former Ridler winner) Dan Webb. As anyone who knows Dan can attest, he likes a good joke, and when dialing in the drop-off times for the roadster to get painted, Dan half-heartedly suggested Darryl trade the paint- and bodywork on Cory and Ashley’s roadster for the build and fab work on Darryl’s ride.

Not wanting to potentially ruin a good friendship with Cory (as it happens sometimes in these situations), Darryl discussed the trade with his wife, Terri, and the pair decided it was probably the best way to get his car finished, so they said yes and, in February of 2014, the swap was made. Once at Darryl’s shop, he started working on laying down a perfect single-stage black paintjob on Cory’s ride, and Darryl’s roadster ended up in Michigan at Webb Automotive Art and up on Dan’s chassis jig.

Though sufficient for a basic street rod, most of the items on the chassis would be out of place on the style of car Darryl wanted to have, so the SO-CAL framerails were left, but just about everything else, including the X-member, was removed. In went a 1940 Ford X-member, which already had provisions for the correct pedal assembly Hollenbeck wanted, and the rear was kicked a little to lower its stance and accommodate the Model T spring.

Dan and Cory also installed a Rodsville Halibrand-type rear (4.47:1), which was prepped and painted by Brandon Flaner. The rear featured Dutchman axles, and is located with a custom three-bar system (two lower outer rods along with an upper center rod) built out of split 1940 wishbones by Cory, who also fab’d the Panhard bar.

MT Products’ 1940 Lincoln-type drum brakes are on each corner, and a transverse spring and SO-CAL shocks smooth out the ride. Steering is handled by a Vega box and a LimeWorks column, and original 1940 Ford 16×4 wheels (wrapped in Firestone 500×525 rubber) were used up front while 18×4.25 wheels were shod with 700-18 tires.

Darryl turned to Edelbrock for one of their 380-horse crate motors, which was outfitted with an Edelbrock 2×4 intake manifold, a PowerGen alternator, and an MSD ignition with Taylor wires. Cooling is cured with a Walker radiator and Cooling Components fan while stock ram horn headers and a custom 2-inch stainless steel exhaust removes unwanted gases. The V-8 bolts to a T5 BorgWarner transmission, prepped by Astro Performance. What chrome there is on the car was handled by both Tennessee’s Advanced Plating and California’s Sherm’s Custom Plating.

The 1932 body originally came from Brookville Roadsters, and Dan and Cory fit it with Rootlieb 25-louver hood sides, a sectioned hood, and a Brookville Deuce grille shell and insert (with a custom center bar). More custom fabwork can be found inside the cockpit, with Dan fab’ing gloveboxes for the ends of the Deuce roadster dash, which was also lengthened for the Stewart-Warner Hollywood five-gauge insert that features a big Police speedo. Cory also modified a Model A shifter to work with a Pro 5.0 shift tower, and DynoTech supplied the driveshaft.

Once all of the fabrication was complete, the roadster was returned to its owner where he and Darrell Schneider prepped the ride before Darryl added the color, which, along with its stance, may be the most important thing about the car. Most folks toil with the choice of color for their rides but, with Hollenbeck being a well-known painter whose choice would also make an obvious statement, color choice became critical.

Not wanting what someone else already had entered into the decision picture, as did making sure the wife liked it, too. The roadster had a lot of traditional elements, so something that looked like it could have rolled out on a Lincoln in 1940 would be going in the right direction. All said and done, Darryl mixed up his own unique shade of brown with PPG Envirobase waterborne paints to cover his car.

Once out of the paint booth, construction continued with help from Joe Compani and Ryan Campi of Compani Color (who prepped and painted the chassis), as well as Jack Stratton, plus Bill Ganahl and his team at South City Rod & Custom, who helped with final assembly. Next came the addition of a one-of-one Bop Top from Sid Chavers (the bows were repositioned), the chopped windshield posts from Cory, a set of Guide headlamps, and a pair of taillights and door handles from a Chrysler Airflow. A LimeWorks Crestline steering wheel fits the car’s profile, and a multilayered chunk of paint from Darryl’s father’s paint booth was turned down on a lathe to produce a one-off shift knob.

Cory Taulbert flew out to NorCal to wire up the roadster using pieces from Rhode Island Wiring Service harness and an Enos panel, and Sid Chavers created the bench seat in the car before covering it with sections of leather as well as a fabric insert piece from a 1969 Cadillac.

Both Darryl’s and Cory’s roadsters were finished up (Taulbert got his dream paintjob—an inky black one-stage for his Deuce) and the pair decided to debut their rides by driving them from their respective states to the Roadster Roundup in Austin, Texas (a 3,400-mile roundtrip for Darryl), in 2015.

But for Darryl, just as important as delivering a world-class paintjob is making and maintaining the friendships he’s fostered throughout the years. For him, he wouldn’t want one at the expense of the other and, luckily for the rest of us, he’s really good at both!

Grand National Roadster Show:

POMONA FAIRGROUNDS

CALIFORNIA

Dakota Wins at Irwindale Drags!

Posted on May 19, 2015January 30, 2020 by Steve Carpenter

19 May

inflightuav.com Dakota Sun from bordhead on Vimeo.

AMERICAN DRAG from David Harry Stewart on Vimeo.

Dakota had a great Drag Meet this Sunday at irwindale for the Summit Series , his Bronze Star racing ZRX14 took the win all day and came home with another trophy for the cabinet.

A really good day was had by all as we supported Dakota and enjoyed to some great races.

Below Dillon Gives “Aaron pine” Dakota’s pops some advice on how to get a good start!

Weather stayed pretty good with some low clouds in the afternoon and slightly cooler temperatures which made for good racing.

Below “Aaron Pine” is all set as he makes a timed run down the strip, this bike is a consistent machine with many wins and championship titles too!

Troy takes another shot of getting his Suzuki dialed in, unlucky fella usually but this Sunday he put down the Rubber and managed some good times.

Kota Kai is all set as he is about to wring the neck of his ZRX14 out and hit the mid 5’s at Irwindale.

Dakota and Troy Line up, the tree goes and Kota flies off like a Bat out of the Proverbial hell and taking the light.

Flying French Man ” Le Top” Sits astride his Period Kawasaki as he gets to stretch his frog legs out, he is a fun and determined guy.

Le Top and Shorty go at it to set some good times and dial their machines in, weather was great but there were many Left lane clean ups.

Staging Lanes as Dakota and le Top have some friendly Banter in the staging lanes, Dillon is making sure air pressure is where it needs to be.

Shorty and Troy shoot the Breeze as they get ready to run on the 1/8th.

Below, Bob Pines -crew chief for both Dakota and Aaron makes sure all is well, as my buddies from the 59 Club, James Matz, Dietrick Flores and James O’Donnel enjoy this meet up.

Quite a few track clean ups all seemed to be on the Left lane too, this causes a few issues, like getting bloody hot on the staging lane whilst in full Leathers.

It can seem like a hours when you are waiting to get on the track but just part of the event sometimes.

Soon the clouds starting to come in a little bit for some cooler breezes which was much appreciated.

Le top the flying Froggy gets ready to do battle. ” Zis iz Fun”! He Replies!

Kota sporting one of my Nostalgic Tee shirts as they try and stay cool before the call to the strip.

This is always great to see when Dakota and his dad get to race each other, it goes to and fro sometimes and makes for entertainment.

Kota gets the right Lane and is hoping to get the old boy at the light.

Winner! As Kota schools his dad this time, but- there will be many more runs like this through the season and can go either way! Jennifer sticks her Thumb up to say good lad as her son gets one more win!

Aaron now out of the race this weekend sits and chin wags with the Wacky froggy of Le Top Racing, a fun guy for sure.

Troy gets another go at the track on his Suzuki. a little nervous but its great to watch.

Le Top gets ready to bung on his Skid lid, as Aaron politely tells him his tire is as much use as a french goalkeeper!

Le Top gets on the track and has a by- so an easy win for him but he now will get to the final.

Le Top gives it the Beans as he gets the Much needed by and gets into the finals easily.

Kota gets the Far lane as he takes on Troy and here they warm the tires up to get plenty of traction.

Dakota’s Grandad makes sure he is bang on the good part of the Track and gets set on the line.

Time to focus and get another win as Dakota is all set to hit the loud button and head for a 5.57 dial in.

Kota takes out troy and is now in the finals and against the Jolly Green Giant. Le top! As Aaron messes with his Dial in time on the ladder Bar!

All in good fun as both riders sit at the staging lanes, this is a great place to see all thats going on,

Time to get ready, as My girlfriend and Dakota’s Mum Jennifer Sun sits on the wall to give him some good luck with Taylor Kota’s girl to her right.

It is now Game Face time and the finals await for the Summit Series.

The countdown begins as they wait for the all clear to get on the tarmac and battle it out!

Troy looks down and wonders why his clutch hand didnt work as Dakota Schooled him.

So- Number 6 against number 7111 and it is a great day for it.

Kota looks up and see’s that they get he go ahead to suit and boot, now it is Game on!

Clouds helped the track to bring the temperature down and make the bikes breath a whole lot better.

Here we are then, time to warm the tires up and get ready for this great final USA V FRANCE!

Winner Winer Frogs legs Dinner, Kota takes the win on this epic day, well done mate.

On the center of the track as all Winners get a photo on the 1/8th here and what a Brilliant day it turned out to be.

Kota and the cup, he has more cups than a bra Factory and still only 20 years old!

Here are some super cool shots of Dakota that Adam LaVelle of Loose Nut Racing took at the track, great job Adam.

Great action shot here of Dakota racing full tilt against his dad “Aaron Pine” Always great to see these two race each other, last time his dad got him at the end, but not this race, Dakota ran the numbers and was on the Ball all day!

Another Superb Shot as Dakota Kai goes for the Win once more on his Bronze Star Racing group ZRX14 courtesy of Kawasaki USA!

Above Kota Kai with Grandad, grandma, and his dad as this Grease monkey Notches another win and gets the points he justly deserves in the Summit series.

Here we all are, we all support these guys and they do a super job, Drag racing is fun and still a family sport, come out and support when ever you can, its the best $5.00 you will ever spend and not many events you can get so close to the action as a spectator.

Above, Bronze Star Racing Group show their strength and you will see much more than this for certain as the series goes on.

It says it all LUCAS OIL who Sponsors Dakota and Aaron, have fantastic machines that get the job done, come out and watch for yourselves.

And Below, Dakota and Le top in the final as they are ready to hit the Throttle and get the win, kota get a great light and is bang on his numbers, Well done Dakota we are all so very proud of you mate.

Here is the Father Son Race and these always can go either way, this time Dakota takes the win.

Also here we have Le Top with a win against shorty running a 6:65 Dial in.

This time the next round I managed to just get with my Iphone was against troy and gotta smoked him!

Here we are with what I got on my Phone, Dakota and Le Top in the final, Kota gets the win and wins the Final, great job Buddy!
Le Top is a great guy but his frog legs just couldnt do it today!

A great day and well done to all that raced and thanks for everyone that came out to support this awesome Summit Series.

Dakota Made the Final at Fontana

Posted on June 3, 2014January 30, 2020 by Steve Carpenter

03 Jun

Photos by Adam Lavelle check him out at https://www.facebook.com/Loosenutphotography?ref=br_rs

Well, our shop grease monkey “Dakota Kai Sun ‘ put another feather in his cap on the weekend, making the Final of the NHRA Pacific nations, the competition was just as ever, Tighter than a ducks Arse and Kota managed to get his KAWASAKI ZRX 1400 through to the final round up against Augustine Herrera.

If you get to Fontana or Irwindale or leis Vegas or even Barona, look out for 7111 as he runs them all.

Shinko Tires, Muzzy Performance, Mav Tv, Penske Suspension, Kawasaki motorcycles are his sponsors and he races for Bronze Star Racing Group.

A hive of activity at the track and the Sun was out to make the day interesting.

Lucas team discuss the Values of cool sunglasses on such an epic race meet.

Hooked and launching, Dakota does what he does best.

Hot temps, sticky track and constant temperature changes are actually a royal pain in the arse for a competitor.

Dakota getting ready ti light the rear up as he Grandad “Bob Pine” gets him straight on the line.

Mavtv enjoy Dakota’s successful start to the race season.

That Muzzy sure lets people know who is in the house.

Proline Wraps.com is all you are going to see as you face Dakota kai Sun- just satin’.

Kota is all attitude when he gets in the groove, his main objective is to get the goal he has set out to do and he does it to the best of his ability, every time, he always pours 100% into what he does and gives it his best shot, you can never say he didn’t try hard enough as that just is not in his vocabulary.

But, Even he missed out by the smallest of margins, he is now all set for this weekend when Dakota is back at Irwinindale where he is still the points leader there and hope to improve on his points standings.

If you have never been to watch Motorcycle drag racing, come out- you will be so glad you did, the noise, the smell, the camaraderie is second to none.

A lot of racing still to come, hope to see you out at some of the meets the NHRA holds, come by, say hello it will be great to see you.

Login