I went out for a Pint of milk, Came back with 10 CB750 Engines

It’s a funny old world, I mean, I initially went out to get a pint of milk and on the way there I came across a stash of SOHC Motors that a buddy of mine needed to off load as he was clearing his place out for renovations etc, what better way of getting rid of them then to let me have them.  And, as I have a Long bed Pick up truck, I thought to myself I should be able to get all 10 engines in the back of the F250.

Lucky for me, it’s only 4 miles from my place, and as my old beast only does 6 Miles to the Gallon, it was well worth taking the turck to go and get these SOHC in line Four Motors, they had been sat outside in the Californian sun for many many years but I can use some of the parts even if some of the motors are locked up etc.

It was no easy task carrying 10 CB750 Motors from a back yard and loading them onto my truck, at 230 pounds each, every one became heavier and heavier, by the time I had dragged the 10th Engine out and up and onto my bed of the F250, i was feeling as weak as watered down beer. But I got them all on and then thought about it, man- That’s just over One Ton of Engines, and the F250 is a 3/4 Ton.

I know I will have use for these, even for parts alone, I have a small collection now that for now I shall place in my barn and wait until later on when I have some free time to see what is what.

These towed home no problem in my pick up and that hardest part was unloading a Ton of engines, as it was only 3 miles from my place and I was already tired from throwing tem up onto the pick up bed, but, not as far to move to the barn.  I sure felt it afterwards as thats 2 ton moved in less than 2 hours.

I have stored them away now in the Barn, but I am still working on New doors for the outside, so will just have to tip toe around for a bit until I am ready to hang the doors up.

Glad to have got them and I know I will be turning to a few when I create some more machines for the tarmac, nice to have spares at your finger tips though.

I have another Motor in a frame you can see and one more on a dolly in the shop that I need to move over, always something to do at my New location, it will take a little time to get it how I want but then it will be icing on the cake as working from Home is always the easiest and more enjoyable way of working i think.

I have a lot of work to try and catch up on since our European visit but refreshed and ready to take on another chapter in the life of Custom Motorcycle creation, I have a few ideas for more exhausts, Handle bars and other parts, so stay tuned to the site if you can.

Oil leaks whilst i was away need to be cleaned and gaskets fitted, Doors painted and hung, and then organise the bikes and where the parts will go is something that is not to be rushed but everyday there is something to mess about with and I enjoy so much.

Thanks for reading my posts, I like to share what I have been up to and its great hearing from you too and seeing what you are building at home, if I can help I always will be it via email carpy@carpyscaferacers.com or call / text at 714-598-8392 as its a pleasure having a chin wag where ever you are in the globe.

 

 

Picked up 6 CB750’s today

Sometimes I get a call asking if I could clear out a garage or back yard as it has a motorcycle in it, this time it was 6 CB750’s, so what closed the deal was it was free but a friend of mine I have known many years and helping him out was the least I could do, and as he was less than 4 miles from me, I took the big G F250 out there and loaded up and bought the bikes home. I dont like to have to many as the place gets jammed packed but, its hard to not when it is so close to home.

To be honest, I can never really turn bikes down, especially CB750’s as I have had over 150 of these over the years and parts are always good to have handy, so I could not say no to this fella and help him out of a predicament too, these were in the back yard of his place, so a huff and a puff as some had flat tires etc but, determination is always key here and I wanted to get these home to eventually be used as another build. Once I get the Barn doors completed I shall space in the workshop to haul these up there and find a corner to rest them up together.

I have always enjoyed coming up with another build, they do take time and of course money, but when you hear them fire for the first time in many years, its something you get quite a buzz from, I get many texts or emails from Builders and customers who tell me that they just got their machine to run and I feel so stoked for them as I understand the euphoria that they feel when they first time you hit the starter or kick the kick starter and the engine coughs into life.

These are getting harder to find in back yards these days, I remember at one point I had 25 CB750 Honda’s in my back garden and driveway about 20 years ago and I have built every one of them over the years, so I was quite stoked to have these and bring them home. But don’t want the place to look like a junk yard so have to hold back on other stuff I have been offered.

Nothing super rare like sandcast etc here, but a couple of K1’s of which I have always liked anyway as never was a fan of the Ko with the Big side covers etc, there is no rush to do anything with these 500 pounders, so just unload and put them up in the Barn later until I come up with a build plan for them.

I have spent a lot of my life with Motorcycles and finding new stuff is always fun, just bringing them back with a plan of getting these to be back on the road in one form or another is always a challenge that I quite enjoy.

I have some Motors to look at tomorrow, so who knows what I may bring home, the hunt is half the fun and even though they are what I call snotters, parts are always handy to have when building machines.

So now is the time to unload these and see what is there and then I can mentally remember what these are as I store them and know that I have a choice of frames and years if I get into creating a new Build that will turn into something head turning, its hard to refuse when you build motorcycles and parts for a living, some will get it, many will not and think its some disease etc. LOL!

Of course, if I do start a creation, I will be sure to post on the website and share with you lot as many of you ask what I am up to these days and I thank you for that, I will be making more new parts too, so keep checking back on the website to see what’s going on, I do like to post blogs too and give you lot something to read.

 

More Exhausts on the go, busy times at Carpy’s Garage

Busy day at home and more 4 into 1 Exhausts systems are now completed, I have been busy as of late and just about caught up with previous orders, I love making these and getting them sent to all over the world.

These are the CB750 and Cb500-Cb550 Yoshi style systems, some of these will be Ceramic Coated, some will remain Raw and be packed in boxes ready for shipping etc, always good to be busy and more styles coming out soon.

I sent a few boxes off to Europe today, good to get that lot on their way to their Customer and they can get their own machine back on the tarmac, the Sun is out and that always gives you a little extra boost of work ethic, so got a ton done.

Well, I best get a few packed away in boxes and put in my workshop, but just wanted to share what i get up to some days.

Thank you for suppoerting me, I am a one man show and the show is going good.