Honda CB750K 1976 SOHC I have managed to revive.

Well, I thought I should at least out down on some what of a lost, the parts that I have either refurbished or replaced with New Old stock on this 1976 K6 Machine as its so easy to get lost in the many parts you need to sort out, to be able to ride a non running machine that had sat in a yard for many many years.

 

  1. Brand New 4 into 4 Exhaust system from Japan
  2. Brand New Exhaust clamps
  3. New Genuine Honda Horn
  4. New Genuine Honda Clutch cable
  5. New Genuine Honda Fuel tank rubber
  6. New Complete seat assembly
  7. New Genuine Handlebar Grips
  8. New Levers
  9. New Mirrors
  10. New Chrome Rear Shock Absorbers
  11. Powder Coated Rear Swing Arm
  12.  Chromed Stabilizer bar
  13. New Chain and Sprockets
  14.  Rear Hub rebuilt and polished
  15.  New Rear Rim and spokes
  16.  New rear Tire and tube
  17.  Polished brake hub with new brake shoes
  18.  New brake actuator arm
  19.  New brake rod and spring
  20.  Rechromed rear fender
  21.  NOS rear tail light assembly
  22.  New inner fender
  23.  New Battery
  24.  New Genuine Honda Coils
  25.  New Plug caps and plugs
  26.  New oil and filter
  27. Rebuilt and tuned carburettors
  28. New intake rubber boots
  29. New starter cover
  30.  New Clutch Cover
  31.  New OEM kick starter
  32.  New Oem Brake pedal
  33.  Rebuilt front caliper
  34. New exhaust spigots
  35. New fork tubes upper
  36.  Rebuilt lower forks and polished
  37. Stripped and Powder Coated Main stand with New Spring

I have a few more little things to do on the bike and then I can fire it up again, but I am glad that I persisted and continued to clean this big 4 machine up and its looking pretty cool as it stands right now.

She does sit at the right height now, as I have fitted the correct size tire in the rear, I need to clean up the gear shift cover and will do that this week, as well as the sprocket cover, this bike has many New parts on now, I would like to repaint the tank and side covers but no time at present and I have many other motorcycles to build, this is the original Candy Antares Red livery.

The exhaust system fitted really well, I am a dealer for this system and they come direct from Japan with the baffles included but not the heat shields, but I was super stocked at the fit of these and the chrome looks amazing.

I used New spigots and New flange clamps to set the pipes off, would seem sacrilegious to go any other way as the original ones were rusted and looking worse for wear, this is a nice fresh factory look i believe and super glad that I went this route. Not cheap by any standards, but chewap will not last so buy right and you will see the benefits further on in time compared with inferior copies of this system.

I have always loved the look of inline four machines and the Honda was such a popular choice back in the UK when I was a Teenager, I have had so many Honda’s in my life and continue to work or build them in my barn.

I did buy an aftermarket rear fender as the original was quite bad in the way of rusty deposits, but the aftermarket version that I paid $200 was utter rubbish and got my money back, so invest the $400 and  stripped and chromed the original fender and bought a New tail light assembly, sure looks nice now.

I have also fitted a New seat, the other one was ok but I wanted a fresh look and thought I may as well get another new unit to complete the bike and give it the right ride height, these bikes were a tall ride and have to be honest was surprised the Japanese Public could ride these as I am 5″11 and am tippy toed when sat upon this bike.

Sure, there are many more little things I can do to this machine but my plan was not to restore the bike to its New appearance in 1976, but to give it a fresh look from a sad and tired past of sitting in a garden to the elements for many years, but this will be for sale, I think $5000 is a fair price and, if I do more work, of course the price goes up, the exhaust system alone was $1600.

New Grips and Levers and cables etc help this old Lady become young again and of course I fitted stock mirrors for that 1970’s vibe and takes me back to my last years at school when I first saw a Red CB750K coming down the road.

The bike sits well and I removed the main stand and powder coated it and fitted brand New Genuine Honda hardware, I wanted to use the main stand as many have been removed over the years, plus it makes it so much easier to remove the rear wheel or chain etc.

The New tire and tube feels great, with New original DID rim and polished Hub with new internals and New brake shoes, Rod and actuator, this is a super set up and the New rear shock absorbers are the correct models for that ride height of 1976.

New footpegs and New Old Stock Brake pedal and New old Stock Kickstarter help clean this five hundred pound 2 wheeled Classic Thorobred up and give it a new lease of life, hoping that you are liking what I have accomplished on this 50 year old Motorcycle.

I took this out of the Original bag, cost me over $150 but its the Original and stoked that I located one not too far from me so there are some neat touches to this Motorcycle that you may enjoy looking at.

Now, the Carburettors are completely rebuilt, synchronized and are attached to genuine Honda NOS intake boots, I have old 1976 Velocity stacks on the bike but do have the original Airbox for the old girl. And also I fitted a New Clutch Cable and Covers too, Just have to fit a bolt in bottom points cover today.

The rear wheel is all rebuilt with New spokes and new bearings too, New chain and sprockets is a must and she really is a Classy looking bike, not yet found the title but am looking for it, I think the original owner has title and I have recently corresponded with him, so he may find it, if not I will sell with a Bill of sale as its been off the system for many years.

It does need a New front tire and I may fit another later on as I go along, but right now she looks really good and wanted to show the machine on my website as many people have been asking about the old girl.

Thanks for looking and I will continue playing with this CB750K until she sells, but of course, the More I work on it, the more the price will increase, but I do enjoy reviving these inline four beauties and hope you have enjoyed the pics and write up on this Japanese Iconic bike.

 

Honda cb750K 1976 Gets a work over

Well, the weather is now Hot as the inside of Gandhi’s Boxers, but I have been doing some work on the K6 Honda, I started to clean a few bits up as she had sat for many years in a back yard.  So I thought I would clean her up more before selling this inline four machine.

The bike had low miles but obviously the condition had deteriorated due to being sat out in California weather for many many years, but the more I cleaned up, the more I put into this 500 pound of Japanese machinery.

I removed the rear wheel and swingarm as the swingarm was in need of having the paint stripped off of it and then have it powder coated, so I just got it back from the coating company I use and fitted it right away, I had to drum sand where the shock bushings go and fitted new Genuine Honda steel Bushings. You can see the rusty main stand in the picture, Once I have this back on the floor, I shall remove it and powder coat that Black too.

So much to do, the wheel is all rebuilt and I polished the hub and fitted new bearings etc, new spokes and new tire, I fitted the Cush drives this afternoon and its now ready for the brake hub to be fitted as it was in a sorry state too.

As you can see from the photo, she is all there but I stripped it and polished the outer carrier and fitted new shoes and actuator etc as I want this to look nice, not restored from frame up, as I don’t have time and space right now, but just a nice looking K6.

As you can see, this is now taking shape, I wanted a fresh clean look on the rear end and I believe I shall achieve that with a few more hours work on this classic inline four bike

The safety guard for the rear sprocket has seen better days and as you cannot find nice ones anymore, I had to get the hammer out and clean the dents up from where the chain has caught etc, these always get abused but wanted to make sure I got this as nice as I could and then send it off to the chrome shop.

A really nice job and am more than happy with the finish as this was pretty torn up when I removed it from the rear wheel, so not time to start bolting it all back together.

You can see I took my time and also used Genuine Honda parts where ever I could, the Bushings for the shocks are factory ones and I also used a New rear brake rod as the old one was really bent up and rusty to repair, I also purchased new chain adjusters to clean the rear end up and set the wheel off.

It is coming together and took my time as it was so hot today and of course I was on my own and do not want to scratch anything, but as you can see this bike is looking nice, and even though not a show winning restoration, it will be all there and I shall be fitting brand new 4 into 4 exhausts to give it the factory look it had when it left the factory all them years ago,.

I chromed the rear brake Stabilizer bar as that was rusty and new hardware through out, looking so much better than when I dragged it home, fitted New shocks and put the new chain on and set the tension right.

It is missing the chain guard and hope to purchase a New one soon to finish that area off right but I am sure I can get on with many more things before I need to attach that part.

I did buy a repro rear guard as mine had rust on it, but, it was so far out of wack I bit the bullet and paid a few hundred dollars to chrome the original rear fender and sent the copy one back in disgust. I prefer Original parts anyway and the list goes on of what I am refurbishing to get this bike right.

I fitted the original back into the frame and a new Old stock inner fender to clean the underside up. I have chromed the rear light assembly and that is going on right now.

To keep with the clean look I splashed out on a New seat for this K6 and glad I did to be honest as the original had seen better days, this really is a good seat and fits super well.

I put the light assembly together, using New light and chroming bracket, this is now all together and will wire tomorrow as its getting late but thought I would share with you today to show you how I am getting on.

Happy 4th Of July everyone

I love having this day off, gives me time to reflect how lucky I am to live in such a great country, I have always loved living here and especially here in Southern California where the weather stays pretty constant and ideal for taking your motorcycle out and about.

I have much to catch up on and as my girl is heading back from the East coast, it will give me some time to try and sort the workshop out a little as I have way too many bikes in there that need attention, I dragged a few out of gardens and the K6 that I am working on never ran since the 80’s. I was just going to see if there was a chance I could get it running, but it has turned into a project that I should of left alone. But you know how that goes, when you think to yourself that you will just clean this up, change that etc, well I have done so much I should of ripped it down the frame and started fresh. But it should look nice when done and out of the way to give me a little room to start on another one.

The rear wheel I just could not clean up, due to the rust that had accumulated from sitting in a back yard with sprinklers that went off twice a day for years, so I had to pull the rim apart and located a new old stock 18 inch rear rim and purchased new spokes. Polished the hub and fitted new bearings.

Next up was the beaten up rear sprocket carrier, its seen better days but do not have a spare, I have a 78 one but the offset is different, so I will try and clean this up as best I can using my little buffer wheel and some compound, but it wont be too show polish as I am getting too pernickety with this and really just need to get it running well and of course riding well.

As you can see, the poor sprocket carrier has seen better days, bearing is fine and will repack with grease but need to clean it up a little before I attach that to the hub and then the sprocket as well as the Guard, but that is at the chrome shop as I am waiting on that.

Still a little more to do before I am happy with it but at least this is getting back together and I am now waiting on the rear swing arm I took out as I have sent that off to get powder coated as that too was rusty and needed attention from sitting for so many years. But will keep you updated as and when I work on this old girl, it will be fun to ride with all new parts and will be dead stock, I now have Brand New 4 into 4 exhausts for it that I purchased in Japan, so this will look pretty cool once done. I will ride it a little then offer it up for sale.

Have a great day and hope you enjoy what ever you are up to in the world, I thank you for all your orders too and if I can help just drop me a line. carpy@carpyscaferacers.com