The WILDCAT CB750 HONDA FOUR

You would seem it strange to have forgotten about a Motorcycle I had built for a Customer, but as I have created so many machines over the years, I guess I do get a bit of a Brain Block sometimes, it was not until I was flicking through some photos that I noticed this CB750K Model Honda Four  Motorcycle that I did my surgery on and turned it into what he wanted, a real Wildcat.

It was a Shiny Chopper-ish style machine that my Client had owned for a long time, but wanted a change and Loved the Cafe Style Bikes that were hitting the tarmac around where he lived, so my job was to transform this cruiser into something more Racer Looking.

The Rims were stock but I wanted to add a Fatter rear end with some nice Rubber on the Rims and also give it some color to stand out right away, you cannot miss the Gumball Red, it is so striking.

I used Polished stainless spokes and Polished both hubs, as well as hand drilled the rear brake hub to give it that Road Race styling, it gets rid of the heat from braking, Dust from the shoes and cools the brakes when running along the tarmac etc.

New adjusters, Brake Rod and actuator arm, make this machine brake like a New bike and it sure looks clean now, a lot of attention to detail that I am known for.

New Rear sprocket and chain finished off the rear end but I think I want the rear end to sit a little higher, so them shocks will have to go for longer versions.

Longer Chrome rear shocks made all the difference in the ride height and the response when cornering, I am glad that I went this way, I also machined some 6061 and milled a Finned Stabilizer Bar to give that more Custom look, rather than the Flat Bar Honda uses.

I made a nice Bump Stop leather Racing seat unit for this bike, that still allows the seat lock and hinges to be used, that way you can get to your tool box and documents easily, the Motor got a once over and then I removed the stator cover, sprocket cover, Trams cover off and polished to a chrome finish.

The Customer worked at the Zoo with the Tigers etc, hence the title of the bike Wild Cat and that’s what he dug, so we applied that in a Gray color to the Petrol Tank.

I took the Gas tank off and hammered the sides to make my Classic Knee inserts, reminiscent of the old racers back in the day, making it easier to tuck your knees in and get more tighter on the bike and be a bit more aerodynamic as it were. Smoothed out and painted a Gloss Black, also applied my Checker Decal Kit then pinstriped the edges and ran a line around the knee inserts to finish them off, ready for Clear coat now.

New Gas cap and Lock to finish the tank off nicely, I do prefer the stock gas tanks, so this mod I do really makes this look like a factory item.

The Customer didn’t want rear sets, I would of preferred them but its personal choice and I have long legs – so need to have rear sets on my builds, but this looks pretty darn cool now its all back together and can run under its own power once more.

She is sporting my 4 into 1 Yoshimura style Performance Exhaust system and the inline Four Motor now breathes so much easier and sounds awesome with a Velvet Tone out of the tailpipe.

I cut the old fender down as it had some dings in it, rebuilt the front brake and added New Hose lines to it as I wanted this to stop on a Dime, well- maybe a Dollar Bill.

Sitting in all her Glory- The Wildcat runs hard and strong and boy is it fun in the twisties, as you can see I added my Signature Clubman handlebars, for that low stance.

I always enjoy creating these Motorcycles and the owners are always super stoked when they take them out for a spin for the first time, there is a lot of detail here and I offer the parts on my website if you want to build your own version.

A fun Machines that will give you many miles of smiles this bike sat right and really handled well when you gave it some beans in the corners, super proud of this one.

This has rebuilt front forks, New side covers, custom Turn Signals, New bars, new controls, new throttle cables and levers with new cables, plus New GT grips, rebuilt Carbs and Custom Bellmouth Velocity stacks.

Look at how well the bike sits has a New TriBar headlight, new fork gators and New ignition too, The seat I upholstered and used High density foam so you have a comfortable ride.

Thanks for reading this and hope that you like what I have dome to this old inline Four CB750 Honda, these are brilliant bikes and phenomenal engines.

I hope to post more creations that I have completed and share with you lot on here, love hearing all the positive feedback, thanks very much indeed and let me know if I can help you with your build.

Comments

comments