How can I fit my own Front fork seals? Easily, if you have removed your seals, what I would do is go to home Depot, or to your ACE hardware store and buy a 1″7/8″ piece of plumbing plastic pipe about 3 feet in length. Simply drop the seal over the fork tube, then slide […]
What’s the Biggest tire I can use on my 750 Honda? Ok I always run a 110X90X19 on the front and on the rear I run a 130X90X16 or 18″. You have to take into account the stress of the frame when you are in corners etc, as too wide a tire may look cool, […]
This is the NON maintenance battery I use, no more corroded swing arms, as the old battery has a overflow/breather pipe that usually drips onto the swing arm.
Here is a walk through on how to get that bloody thing off.
To fit New fork seals, I use a 2″ piece of Plumbing Pipe from Home depot, and use a rubber mallet, I slide the seal on and then I slide the pipe over fork tube and simply tap the plastic pipe install the seal is snug in its seating, then remove pipe, add snap ring […]
This is how I make sure my intakes are level to fit the carbs, simple but effective.
” What years are the best to Cafe for SOHC?” Well lets see, stay away from the real early years such as Sand-cast and die cast models, you pay a small fortune for the parts and the restorers will be sending you hate mail. Stick with 1973/74/75 and 76 CB750K models, as there are many […]
Not sure if you have run into this problem, but we’ve put a bunch of those old turn signals on a few of the cars we’ve built over the years (Signal Stat, Yankee, etc. . .) Every time I pick one up it never fails that I’ll spend an hour or so with the multi-meter […]
Here is a small gallery to get your mind going this morning!
This Battery box is another cool part from the shop and now available for you. This is a direct replacement for your old tired battery box set up. Really easy to fit, remove your old one and simply bolt this puppy in its place. A nice touch for your ride and I am stoked on […]