International Motorcycle Show Long Beach Nov 2017

Well, it was that time of year and we were all ready to head to the show, I started my Thruxton up, it purred away as it usually does, rode it onto the kerbside and let it warm up whilst I struggled with my Jacket and gloves etc, Sunday morning, all seemed well, Air pressures were checked, chain tension, Oil Level, Fuel level, Brake fluids, Lights function, Horn, signals and lights.

ims2

Looking forward to riding to Long Beach with my Girlfriend Jennifer today and her bike was now ready to fire up, but I heard just for a split second, my Thruxton Hiccup and drop the revs a tad.

I turned and looked at my machine and there was Fuel pissing out faster than a Rhino with a Full Bladder. FFS !

ims3

Thinking quick I hot kill switch and that shuts the fuel pump off, the motor was warm but not hot but, it sure was steaming from the fuel pouring over the whole motor, so glad it didnt reach the coils.

I put bike away and could see it was a fuel line issue, so had to admit defeat today and jump in the Car and head to Long Beach, that was a bummer as the weather was perfect for a ride.

ims4

But, we made it to the show, seemed a lot smaller than the old shows as it used to be held in both buildings, but none the less a great show as usual.

Met James O’Donnell, Scott the Baker from our 59 club and then 2 minutes later Dave and his side kick from the San Diego chapter of the 59 club, so that was quite a coincidence in the first minute of walking in the place.

The show was buzzing and we saw this woman explaining how easy it is to pick up your motorcycle if you are unlucky enough to drop it, Jenn was all up for it, so videoe’d her having a go, so stoked she gave that a try, as it is a very useful tip if you find yourself in that predicament.

I had noticed some cool machines, I only had my Iphone on me but thought I would take some snaps, as people ask me to Blog and show them whats about, so here it is.

ims6

Above, one of Kottys machines.

ims7

What is not to like about this Vintage Indian, I would be on this and taking around the flat track, leave it in a Tall second gear and start to wear that steel shoe out big time, loved this.

ims8

I wish they had fired the Norton up as the straight through Megaphone would be louder than the local Fire Station Alarm, what a wicked Machine.

ims9

I saw a lot of Gilera’s back home as a kid, seemed to be tons of them in my area in the 70’s but I bet they are all dried up now?

ims10

Vintage Hill Climber would still be fun today, short exhaust pipes would be a Hot and loud ride for sure.

ims11

Do not often see these Beemers about and to have one in original condition was epic to see, back home the rain and snow would of eroded this German masterpiece to just a rusting frame over the years.

ims12

I still see a few of these around but not so much the Race bikes, except for the 250RR Harley I had in my shop, that was killer too.

ims12a

Royal Enfields Answer to the BSA, these were and still are a thumping big fun bike I always love the sound of when its on the pipe.

ims13

One of our friends wives has one of these and this is a pretty good example of the 175cc, many in the UK when I was a kid.

ims14

I would take any one of these out for a Blap, such great memories come flooding back with these Motorcycles.

ims15

Tiger Tiger Burning bright, so stoked to see this piece of Mechanical fun.

ims16

What I would have done to be able to sling my leg over this as a teenager in England, boy would I of had a Blast on this.

ims17

Every ones a winner, right down to the Chrome moly frame, HUBBA HUBBA.

ims18

The old Husky 360 Automatic was a popular bike when I was at school.

ims19

I remember the first time I rode one of these, the Power band was tremendous, I ripped past my Brother in the Kings Forrest one day, leaving about a 4 inch deep trench all the way up the trail.

ims21

Plenty to see and at least one bike here would have a certain connection in your life I am sure.

ims20

I think this must of been George Jetson’s inspiration

ims22

Could never afford these Ducks back then and still cant today but what awesome machines and these really had a unique sound.

ims23

Vincent of anything is cool, this Rapide is begging to be ridden, I have never had the opportunity to even sit on one, let alone ride one but maybe one day, so nice to see.

ims24

Another Machine you dont see enough of, Velocette’s were a common machine 40 years ago where I lived, seems the internet has changed all that, never really see them at all anymore.

ims25

Baby Duck would probably still cook my Goose.

ims26

ERM!

ims28

Above, well you could get an air brushed tattoo to pass the time, this area was pretty cool, even had a Barber and an open workshop.

ims alloy

Above-A lot of work went into this head light fairing on the Indian.

ims alloy2

Old and New seem to work quite well.

ims alloy1

The Indian seemed More menacing from this angle.

ims motone1

One of Motone’s Triumphs.

ims motone

Motone had 2 bikes this year and engraving was pretty intricate.

ims long b

So much work in the side car.

ims long b1

Maybe next year they will fill the old Round building with Vendors like they used to as it was lacking vendors to be honest and more show bikes too.

So all in all not too bad but done it all in 2 hours, so hope it gets bigger again as this was lacking in something but lets see what next years event brings.

 

 

 

 

.

 

 

 

 

A new motorcycle brand springs from a computer

WHEN the covers come off the Vanguard Roadster at the New York Motorcycle show on December 9th the moment will mark the launch not only of a brawny new bike but also of a new brand with big ambitions. Vanguard is an audacious startup that reckons it can use the increasing digitisation of manufacturing to ride with the pack of long-established bike companies, such as Honda, Yamaha, Harley-Davidson, BMW and others, who are together set to sell some 500,000 motorcycles and scooters in America this year.

comp2

That might sound laughable. So far, Vanguard has built a grand total of one machine. At around $30,000, complete with a thumping 1.9 litre V-twin engine, it is priced at the premium end of the market (though well below the price of some superbikes, which can cost three times as much). But if Vanguard has its way, within a few years it will be selling several thousand motorcycles annually from a range of several different models.

comp1

What enables a startup to aim so high is the way digital technologies are lowering the cost of entry to manufacturing businesses that were once seen as the preserve of giants. That is especially so in the costly and long-drawn-out process of product development. From sketches, to clay models, component engineering and testing, it used to take a carmaker five years or more to bring a new vehicle to market. It is similarly slow going for bike manufacturers.

comp4

Some car makers can now do the job in just two, with the help of three-dimensional computer-aided design, engineering and simulation systems. In effect, the product—a car, motorcycle or even an aircraft—exists in a digital form where it can be sculpted and tested long before anything physical is built. It is also possible to simulate production methods.

comp5

This is the approach taken by Vanguard, which was set up in 2013 by Francois-Xavier Terny, a former management consultant, and Edward Jacobs, a motorcycle designer. Despite lacking the resources of the big producers—for now, the firm has just a handful of employees—it used software- in this case Solidworks from Dassault Systèmes.

comp6

A French company) to design a digital motorcycle before turning it into a real one. Such systems are benefiting from the falling price and increasing performance of computing power. “We now have the same level of design and engineering tools as the big boys, which would have been impossible ten years ago,” says Mr Terny.

comp7a

The digital designs also make it easier for the company to gain access to global suppliers who will quote the best prices for parts they need. Design files can simply be e-mailed to a vast network of engineering firms that offer their services online.

comp8

Once road-testing and further development is complete, production of the Roadster is scheduled to begin at some point in 2018 at a refurbished industrial unit in the Brooklyn Navy Yard in New York, which is now home to a number of manufacturing companies. That is another feature of the way factories are quickly changing: with digital engineering, cheaper automation and new production techniques such as 3D printing, it may be possible to rev up inner-city manufacturing.

comp9