Old footage of back in the day and what we are into.

Well, I have seen this footage before but cannot remember for the life of me if I have Blogged about it, thats old age catching up you see.

I grew up with Motorcycles and many being just hand me downs or something I have managed to resurrect over time as I simply didn’t have the money back in the 1970’s, I left school in 1978 but in 1972 and 1974 Arthur Scargill put the Coal Miners on strike and again and a  decade later, he led the union through the 1984–85 miners’ strike, a major event in the history of the British labour movement. It turned into a confrontation with the Conservative government of Margaret Thatcher in which the miners’ union was heavily suppressed.

Many people were unemployed over 3 million to be exact, and seeing as we only had 50 Million people as the population that was a huge loss in the countries earnings and it was hard to afford anything at all, especially new.

Then we discovered Hire Purchase, the never never as we called it, you can buy something new on tick and just pay for it out of your wages every month, how cool was that.

1-Ton-Up-770x472

But watching this video I realized how lucky I was to have just the piece of crap bike and do my own wrenching to make it stand out from the rest but- apart from that, I wanted to be the fasted bike around and did all I can to squeeze every last possible drop of HP from my machine, no matter if it made the motorcycle regularly break down, you knew your bike and had parts to fix it.

2-Ton-Up-770x472

I can relate to this Ton up crew, they may of been 10 years before me but the working class folk didnt change at all for another couple of decades, now we have a middle class and consider myself to be in that guise but I am not embarrassed at what we didnt have as I was super stoked with what I did have.

599593_10151505896031760_1958686537_n

So I wanted to share a few videos with you today to show the good old British spirit and even as it may seem a little suppressed, we made the most of what we had and still do today. And below you will see some News reel that shows what went on at the Bank Holidays in Britain.

Now my Old Man is a Cockney, a bit of a hot head and was a Teddy Boy in the East End of London, Walthemstowe to be exact, a real Cockney as he was Born within the sound of Bow bells.
Now, everyone talks about the fights at Brighton with the Mods and the Rockers, its well documented indeed these days.

Screen Shot 2014-01-15 at 14.40.56
My old man went there once in a blue moon but would prefer to go to the other Beach resorts of Clacton on Sea or Southend on Sea, and that is where many dust ups occurred between Mods and Rockers, many big seaside resorts had these Bank Holiday brawls and many flocked to be part of it as with failing Youth clubs and strict families, Teenagers needed to blow off steam and this is what they did.

1953 Newspapers Clapham Common

Not just them, in the 70’s and 1980’s thats what me and My Brother did too, I’d go to Brighten or up the East coast to Great Yarmouth and Mods and Rockers would get into it there, looking back I am a little embarrassed about it but its my life and my old Mans- And I wont hide the fact that is what went on in my youth, just part of life at that time I suppose.

Also we had Whitsun Holidays just like another bank holiday we would all go to the Sea Side and they were known back then as the Battle on the beaches.

So I wanted just to show a few Videos on here to give you a little understanding of what went on, its all water under the bridge and I have some fantastic mates that were Mods, we all get on but back then we were like 2 opposing football teams.

Plenty here for you to watch and take in and see if you can get your head around this rebellious era that was so much a part of my life.

Some of the videos will show real footage etc and just goes to show how the Young generation were rebelling, when positives and Negatives touch, well, of course you are going to get sparks.

And now we see more and more women riders and I really love it, my girlfriend Jennifer rides and so enjoy seeing her take off down the tarmac.

Lets get more Women on Machines its so much fun, when the two of you do the Ton.

RE

We meet up and go on rides and even have a camp out soon at Joshua tree its going to be fun riding with my Girl.

Jennifer

 

Thanks for reading my Blog today, be safe out there and if you ever want to join us you can check out our rides on meetup.com we have one this Thursday too.

Meet & Greet

Thursday, Jan 11, 2018, 7:00 PM

11 Rockers! Went

Check out this Meetup →

 

Have a great Wednesday and if you want to come check us out at the 59 Club Orange County Section, it will be great to see you.

poster

 

Scorpion Covert 3-in-1 Helmet

Hot on the heels of the Star Wars ‘The Last Jedi’ movie comes this Empire-esque helmet from US riding gear manufacturer, Scorpion. The white Scorpion Covert helmet is the latest addition to the Covert range and if you’re a fan of the movies or simply want to express your dark side this is the helmet you’ve been waiting for.

scorpion-covert-helmet-2

Stars Wars associations aside, the Scorpion Covert helmet is ready to battle the real world with its DOT approved Polycarbonate outer and dual density EPS inner shells. A Kwikwick lining keeps your head dry and free from nasty microbes while the “Aero-tuned’ ventilation system keeps you cool on warmer days. A double D-ring chinstrap secures the helmet in place.

scorpion-covert-helmet-3

On top of looking like something from a sci-fi flick the Covert also features a somewhat space-aged design. Offering customers the ultimate in versatility Scorpion have developed a clever 3-in-1 system for the Covert. By simply adding or remove included components the helmet can be transformed from an open face design to 3/4 or fully enclosed helmet. Both the rear ‘comfort sleeve’ and ‘front mask’ take seconds to attach allowing you to quickly adjust the helmet to suit your style or the weather conditions you’re riding in.

scorpion-covert-helmet-4

Integrated into the helmet’s design is also a clever visor system that stores inside the shell of the helmet. Using easily accessible thumb tabs the visor can be quickly lowered or raised and included with each helmet is both a clear and tinted option. The Scorpion Covert helmet is available in Stormtrooper white, satin Vader black or a special edition ‘Ratnik’ urban camo edition.

scorpion-covert-helmet-5

Thanks for reading and have a Great Tuesday.

blog banner

Just doing some Electrical work on the Honda and Triumph .

The weekends seem to be busy but I managed to get some time to get out in the garage and first off I had to charge a new lithium Battery for Jennifers Triumph Bonneville, her old one was not holding its charge and over 2 years old, so- A new Lithium EarthX Battery was ordered and its ready to fit.  Also, I had some New LED Turn Signals that I made brackets for and then fitted these to the Harlequin Honda, but, they would not flash, meaning I had to make up some resistors to get these puppies working correctly.

 

This was a relatively easy job and think I may offer a little kit to sell to help people out in the same dilemma. Now, sometimes things happen and people ask me how I fixed the issue, so I thought I would add this video to show you what I did to over come the problem with the turn signals, I hope it helps you lot too.

I will be making the brackets soon and offering them on the website as well, it helps you from blowing fises or having to run to far off connectors in the harness.

wire extender

Here is the extenders I made for the job and I made sure the wires were the correct color with factory fitted ends that I crimped to keep in uniform to the stock wire harness, You can see the resistors i made up and wired and shall be offering these on the list of parts you can use on your motorcycle too.

wire resistor kit

Might look a little messy right now but once all made sure everything works, I shall shorten and tie up under the frame so nothing really seen, I will be fitting Colored Heat Shrink to match the wires, keeping everything uniform and easy to locate later if needed.

brackets1

Cut some Aluminum flat bar up and made some brackets, of which I shall later water cut and offer on the website as these are always a hand set up for turn signals on any bike.

brackets2

There you are, still in it’s Raw mode but now polish and will be ready to fit up to the bike on the top of the rear shock absorbers.

brackets4

Now these are polished to a chrome like appearence and I can now go and fit these onto the Harlequin Honda and then I can mount the New LED Diamond Turn Signals to the Brackets.

brackets5

Fitted to the top of the shock absorbers and now I can insert the wires from the signals and then fit the signal into the bracket and simply tighten the nut.

diamond LED signals2

Nice sturdy Diamond Signals that these LED’s will allow for other people on the road to see you, they are in a nice Polished Chrome body and will tuck nicely to the side of your motorcycle.

Diamond led signals1

These are a 3 wire system, I personally only use 2 of the wires, as the third wire allows you to use your signals as cruising lights if you need to.

diamond led signals3

Easy to fit and a real nice custom touch to your motorcycle, I have sold the Bulb versions for over 15 years but the LED ones are way brighter and will last longer at the end of the day.

diamond led signals4

There you go, all bolted up and another job completed on this harlequin Honda Custom cafe Motorcycle, its been a fun bike to build.

All wired up and functions great, so Glad I chose to go this route and have the reassurance that these turn signals can easily be observed from anybody at the rear of me when I am on the road.

Thanks for looking and I These great looking signals available but am just going to be making some wires kits on offer as well as the resistors so you can get the bike all dialed in in one go.

 

 

Happy Saturday out there.

Well, I have always thought Kenneth Williams from the good old carry on Movies was such a character, here he is explaining about Thermo Coupling.

Well, the weekend already but thought as I had unusual stuff on today’s quick Blog, I would add this.

Hope that this weekend you enjoy your motorcycle, or at least maybe even do some work on it, most places North of us have snow and ice, so many will be tucked up in their sheds, but gives you time to get a little bit of wrenching done in time for when the Ice thaws out and eventually the Sun beams down again.

Zündapp snow plow

We are so Blessed with good weather in Southern California and I do not miss the snow and ice on the roads back home in the UK and and and and and so much snow on the ground I was stuck inside and cannot get out to things, well then its time for the big guns to come out.

arctic cafe

Be safe out there what ever you do and wishing everyone a Happy and Safe New Year.

arctic1

Right i am off into the shed in a tic, but right now I am also adding New parts to my website, so if ya snowed in, you can look at all the goodies on offer on here. Happy Saturday.sporty

 

 

HAPPY NEW YEAR TO YOU ALL

Here we are 2018 and on the road to a New 12 months  of adventures, I thank you for all your support, I have been into Old bikes, Hot Rods and the like since I was a kid, I love what I do as well as what similar like minded people do, this has become a way of life for me and have made so many friends from all over the globe in what I do.

 

blog banner

Been building machines for over 30 years and will never stop, too much passion for the 2 wheeled machines.

599593_10151505896031760_1958686537_n

I have no idea where the Motorcycle industry is going but the ride can be a curvy one, I have been here a long time and ridden the rough with the smooth, opportunities in my life pop up all of the time and I look forward to great things, I shall still be building Motorcycles, making more parts, offering great add on parts and of course another apparel range too.

carpy sunbeam

So I am looking forward to the next episode in my life and hope that you too can join along with me on this journey too.

392842_10151619083151760_432958169_n

So-send me High quality photos of your Build and I shall feature it on here. carpy@carpyscaferacers.com I really love seeing other peoples machines, what parts they used and where they are from, it makes this world a whole lot smaller and, I believe makes for a close knit mechanical Family. So send in some cool pics of finished bikes with great Backgrounds like a Railway Track, bridge, River, Church, old Building, Brick wall, you know the deal as people love seeing photos of rides and I look forward to featuring them as a Blog.

carpy9

 

Enjoy this Year and we may even cross paths, that would be cool too.

cARPY TURBO

Coming soon will be New Handle Bars, new headlights, new seats etc and trying to push the fun of creating your own machine to the limit.

gas tank

The main thing is to have fun with what you do and I am here to help, email, call or text I am here to help you out.

thrux

Keep watching website for New blogs and also parts etc.

carpy 2018

A Very happy and fun new Year to you and your family from Carpy’s Cafe Racers.

carpy alloy bike

Now get building your Motorcycle.