FOR SALE- 2014 TRIUMPH THRUXTON 900 EFI Only 6500 Miles

Posted on August 31, 2018January 30, 2020 by Steve Carpenter

31 Aug

Here we are with a great Motorcycle for somebody, this is a great machine and with only 6500 Miles on the Odometer, this will be a great bike to take out and enjoy the freedom of Two wheels.

I have changed a few things on this machine, to start off with, there is a set of Italian ZARD up sweep exhaust for that Road Racing circuit look, these are a super nice tone and stainless steel with Space Age heat wrap covering the header pipes.

I have made a Custom Union Jack seat and that has New foam too and very comfortable for them long journeys if you so wish to do.

Then I have added a New Chrome Grab Rail, just in case you are taking a Passenger or you can use it to hook Bungee straps to and carry things on the bike with no problems.

I Just fitted a Brand New Non maintenance Yuesa Battery to make sure everything is tip top and functions well.

Take a good look, this bike is clean, even under the fender its clean, a nice Motorcycle that I am sure the rider will get many miles of smiles with.

This bike is located in La Mirada and I have the title in hand too.

Drop me a line or a Dime if interested, great for any rider, from Novice to pro, this is a fun machine.

This is such fun to ride, I love the Triumphs for their reliability and looks alone, it’s a cracking piece of kit and am sure that you will have fun with it.

Thanks for looking and have a great weekend. You can call or even text on 714-598-8392. Or email me on carpy@carpyscaferacers.com

Price $5,500 and have Title in Hand.

My Triumph Thruxton Daily Ride

Posted on June 3, 2018January 30, 2020 by Steve Carpenter

03 Jun

My 2013 Triumph Thruxton has served me well over the years, compared to my vintage triumph, this is chalk and cheese in the reliability league and the bike has given me many thousands of miles of fun and still does. it has now had 3 different guises since I acquired the bike from Socal Motorcycles and it certainly gets a lot of attention.

I bought the bike but it was the British Racing Green Color scheme, I’m not a fan of green but, stuck it out as long as I could but, saw so many this color, that I had to do a few things to make it into the bike I really want to ride. I first made a Diamond Upholstered seat for it, long before people were doing it and got a lot of compliments, then I set about designing reverse Cone megaphones in Stainless Steel, and that sure did get people looking.

Next up was to remove the swing arm and weld tubes in to make it look like drilled holes, then re-chrome it, soon as I did that, I fitted New Alloy Rims, wide 5.5 rear from Canyon of the TT range and this really filled the swing arm out nicely. I repainted the gas tank and made side covers as well as the front fairing and the rear cowl, making the seat fold down to allow access to the storage compartment.

The New rims were such a change in handling for this machine, the fatter tire grabbed the tarmac like glue and this was a fun machine to now take out and enjoy .

I loved slinging my leg over this 900 and tear away up the road with a smile on my face, it was now a machine that was starting to get dialed in to how I wanted it, but there was another look I wanted after a while, I mean I also build and design bikes and parts, this is my business card, so always like to change things up and now its on its way to its third livery.

I removed the fairing and was contemplating a different look, so it came to my mind to fit An Alloy Gas tank and side covers, but, I wanted to make an alloy rear cowl for the bike, so with Egg shape Hammer in Hand I set about and made a rear cowl, then frenched a pocket into the rear cowl to alloy for a Vintage light but have a LED insert in that light, old with new.

Loving the look of this and am glad that i went this route, this time I wanted to change the seat padding and went for a soft Tan leather with Diamond Stitching.

Now this sure is comfortable and feels way better than the old one as I simply wore it out with my fat arse sat upon it all the time and this is now comfortable once more.

I now have my Alloy Gas tanl on the bike and sometimes I fit different seats when I make them to check for fitment and this bolted right up with no issues at all.

Right now here she is sat at home and I really do like the way she looks, Classic styling and its a fun machine, this afternoon I shall change out the grips to go with the New leather seat and give the bike a better flow and color coordination. I shall take some pics later in the week to see how they look and feel first.

The front fender I made from an old BSA mudguard and then welded some brackets to the side and the contour is just how I want it too, came out well and love the look of it. if you look at the lower part of the chassis, you see I have my own hand made Bash plate that I made out of Aluminum and then added a Bottle opener, just in case ya stuck when you are out camping.

The Zard pipes sound great and may polish them to get a mirror finish to accentuate the rear cowl that I made as I love how this has turned out as a one off design.

You will also noticed that I wrapped my headers, this was something I wanted to try with an Aircraft application and rather than the old school wrap, I thought that this would look pretty cool as a slip on heat Sock, and sure glad I went this route as these Performance pipes get bloody hot when riding.

I also have a set of Works Performance piggy back race shocks to soak up the bumps, not cheap but my old shocks I had that were TEC, Blew the Nitros out of them when I was in the Canyons on a few pot holes, so a more expensive and professional set were purchased and I am also a dealer for Works Performance and so glad that I have these now as it is night and day on suspension set up.

I also designed and made the Knuckle Duster Heel guard, and offer that on my website as well, I then blanked off the rear passenger foot peg hangers to tidy that area up a little.

Bike now sits well and I am happy with the look, I will be fitting the grips and will show the pics on here so you can see what they look like.

I went with some Cole Foster grips, looked at many but thought that these would be best to go with my leather seat, and am happy with the choice and are really comfortable too.

Really happy with my choice and my hands will thank me later too.

Sat next to My Hot Rod, the Triumph looks happy in its new set of clothes, looks a different bike too, still a little more I want to do as I go along but, thought that I would share some pics on a Blog and see if you like what I have done.

Here is a list of what is on here.

Motone Alloy Gas Tank

Motone Side Covers

Cole Foster Grips

Custom Clip 1″ on’s

Wide wheel kit from Canyon

Custom Drilled and Chromed Rear Swing Arm

Upsweep Rear Polished Alloy Caliper Bracket

Zard Stainless Steel Exhaust Kit

Titanium Aircraft Heat Shield Sock

Speed merchant Finned Engine Covers

Wave Brake Rotors

Beringer 4 pot Brake Caliper

Hand Made Alloy Mudguard from a BSA

Hand made Seat with Leather Upholstery

LED internal turn signals and 6000 Lumens headlight

4 inch Chromed Fog light

Custom hand Made rear Cowl with LED Rear Light

Works Performance Piggy Back Racer Shock Absorners

Hand made Knuckle Duster Heel Guard

Joker bar End Mirrors

Lithium Ion battery by EarthX

K&N Pod Filters

Fender Elimination kit

Custom Horn

Hand made Alloy bash plate with Bottle Opener

Power Commander

Irridium Spark plugs

LED rear Turn Signals

TEC Front Steering Stabilizer

Custom Machines Foot Pegs

Rear Blank Off Plates On Hangers

Italian Thoroughbred Thruxton R is pure Class.

Posted on December 15, 2017January 30, 2020 by Steve Carpenter

15 Dec

Caff bikes terminology has not changed, back in the day, these words seemed to be only understandable to the sub- Culture that lived and breathed these British Factory bikes that were stripped down, parts either sold off or re-fabricated to enhance the Motorcycles speed, Handling and of course performance, but as well as looks, your machine needed to stand out, to really stamp an exclamation mark of Ton Upmanship. This has been my lifes interest and when I saw this machine, well, I just had to Blog about it.

But, now in 2017, we have come a long way, a few years ago it was still a sub culture in the Caff World but, with people creating unique looking machines, the media on the two wheeled industry could not but notice this newer trend of creating your very own Rocket and the proof of that pudding is when Meridian turned out the Triumph Thruxton in 2004, it sure turned heads and the sub culture took a back step and now it has gone mainstream.

Nothing wrong with that, just look at the Brand New Triumph Thruxton R, I mean look at them, they have an old look, but- They have a strong, reliable engine that produces so much power to the ground its breath taking, the lines are so smooth and flowing that even Alberto Vargas could not equal that in any of his renderings.

New modern technology with front forks, full floating brakes and sturdy swing-arm, gives this bike a Classic look with futuristic handling.

So, when you clap your eyes upon a Thruxton -R, you think to yourself, “This is as far as you could go with a Caff Racer” I mean, what else could you do to make this machine any more appealing.

Well. over in the town of Massa in Italy, you will find Alo and his Motorcycle company, they have been creating Caff Racers for about 10 years now and when they were approached by the high end watch manufacturer Meccaniche Veloci to design and build a stylish Cafe Style Motorcycle using a Triumph Thruxton -R, well they were on board right away and began the transformation of a really eye catching Motorcycle, into a precision work of art that runs as smooth as one of the Clients Time Pieces.

Just take a look at the craftsmanship of this machine, the exhaust are of course Italian, from Zars but with a few modifications, take a look at the tail pipes to see that the ends of the silencers features a unique 4 hole design that is reminiscent of the 4 faces of the companies Quattro Valvole watch. The headers flow so well and hug tight and high the the machine, being as one so to speak. Much fettling was applied to get this set up to look like it was from the factory and boy- Did these fellas pull that job off.

The Original Factory Plastics were removed, this machine needed to have some top quality Aluminum panels made, so to start, they decided they would hand form a front fairing but a full version reminiscent of the days back in the UK with a Phil Read style, that flowed like water from a tap. This was by no means an easy task, the lines are smooth but not straight, and to get them flowing curves, many hours of hand forming were spent in the workshop. Using just 3 pieces of Aluminum these were massaged into the work of art you see on this motorcycle, they also fabricated some side covers to keep everything in contrast with the front end.

The detail is so pleasing and reminiscent of the time pieces that Meccaniche Veloci manufacture, as even the leather material used for the Hand formed seat, used the same stitching as the time pieces have as the wrist strap, with the traditional racing stripe incorporated to show this is a fast machine. The Herringbone style stitching works very well and sets this apart from anything out there right now, all handcrafted at the workshop.

The finished example of Alo’s hard graft is so apparent, aptly named “the Bullet” This is on another level of machinery you may see of any Thruxton R right now and would love to see this at our 59 Club O.C. meet as it is such an eye catching Motorcycle and would love to hear them Zard pipes in action, as it would probably sound as deep and strong as Pavarotti himself.

So thats my Blog for today, a nice piece of Italian styling that will always attract attention, I hope you enjoyed Fridays Blog and I try to do as much as I possibly can to promote these machines and of course the lifestyle too.

Now I have to try and at least clean u my old 2013 900 and give it a go but man thats a nice machine Aldo has created.

Have fun with your machine today or over the weekend, looking at things like this always gets my creative juices flowing and I am now looking forward to wrenching on my own Thruxton.

If you are anywhere near Massa in Italy, pop in to see Aldo, they have a wicked workshop and you will enjoy their creations.

Have a super weekend and let me know if I can help with any parts for your machines.

Login