My Old Thruxton was a Fun Machine

Having a day to remember this afternoon, remembering my 2013 Triumph Thruxton that I bought as stock as the Proverbial Rock in Brea and then set about changing a few things as I went along and get it to the style and menacing Gnarly Growl of the mufflers as I hit the apex of a curve somewhere in Southern California. Below, even after a couple of weeks of owning this Thruxton, I hadmade some Monarch Megaphons out of stainless steel and changed the Shocks to a set of TEC piggy backs.

Although the stock Thruxton is so much fun to ride, I just cannot leave stuff alone, I have always tinkered with anything I have owned to try and make it look different and this Thruxton was going to get some sort of make over, but, I didnt want it off the road for long as I use it all the time. Thus a long timed transformation begun and boy what a Fun time I had with this little 900 machine.

Well, by the time came for me to enter the DGR, the bikes Livery had already changed and many modifications had gone by, but this was a great look that I came up with that reminded me of the old JPS formula 1 days and I rode the heck out of the twinline in this guise.

Now this was still ongoing and was not happy until I had changed a few more things but, I still kept this girl on the road, she loved to be ridden and ridden hard, and I got all the moneys worth out of this Thruxton and it was just a fun motorcycle to jump on and go.

I rode this machine in all sorts of conditions and Triumph did a superb job designing this 900 engine as it took what ever I threw at it and more.

It would be nice to keep every bike you owned but I am no Jay Leno, but at least I have some photos that I took to remember some of the fun machines I was lucky enough to own and ride a lot.

I have ridden this to many places and in the Boiling Sun or pouring Rain, the bike only ever failed a couple of times and that was a Puncture and a set of Blown Shocks, other than that, this just ran and ran.

Many a time I took the back Canyon twisty roads out to the Chino Air Museum, as I love ww2 Aircraft, its always fun riding out here and gets the cobwebs of the week blown cleanly out as you hit the curves on Carbon Canyon Road.

But a fun machine and something i wanted to share with you lot today as I sit at home ans catch up on orders for people bikes that they are completing in this Pandemic time we are all in.

I made a rear Cowl from Aluminum and set a Lincoln Zephyr style tear drop LED tail Light in the back, as this Cowl would also store my gloves, Goggles and documents inside.

I loved this set up and was finally happy at the final guise, it did turn many heads I must admit and never got pulled by Mr Plod either funnily enough.

This time Soft Tanned and aged leather was used with 2 inches of High Density Memory Foam to make sure my Arse did not get numb on our long rides that Jennifer and I took.

This bike sat well now, big 5.5 rear tire made sure that this stuck to the tarmac and a set of Berringer brakes up front on a wave rotor made sure I stopped in time.

The Full Stainless Steel Italian Zards Barked well and I wrapped the front in Space EX sleeves that kept my legs from burning and it really worked well to be honest.

I needed that Fog light on many occasions and it gave my Trumpy that European look, I sell the fog light kit still today to people all over the globe, as well as the headlight with internal LED signals, I hand made the fender from an old BSA model.

Another one of My Products that I designed and manufactured, was the Knuckle Duster Heel guard, I had sold many of these and they really do add some cool detail to the bike, many of which people forget about. I also drilled and welded tubes in the swing arm and chromed for that Custom look.

This was a nice ride height for me and took some time to dial in to how I wanted it but now in this guise it would whip into the corners like a Go kart.

I hoped you liked a little insight into my Triumph Thruxton EFi 900 Cafe Racer machine? I sure had a Blast getting this to how it is now.

Hope that you lot get some time in the saddle this Summer and enjoy what we are so lucky to have and share the commeraderie of the road with other like minded people.

Sure be nice to see some of you when we are out on our travels, we have made so many friends in this industry and always glad to meet other enthusiasts such as your selves.

It is always good to get out and when I get back, my mind is clear and I am ready to design and make new parts once again, this has been a fun 20 years doing what I do.

If there is anything I can do to help you along with your machine, just drop us a line at carpy@carpyscaferacers.com or text on 714-598-8392 as I am here to help.

Thanks for reading my Blog today, its fun to do, takes a bit of time but always worth it if I cheer your day up a little bit.

Peace N Grease to Each and Every one of You!

 

 

 

 

 

I started doing this here 19 years ago today.

Wow- Time does indeed fly by, on February 15th 2000 I started doing this and 19 years today I am still enjoying what I create and sell to you lovely lot.

Hard to believe that this 140 pound guy from North London, would be living his dream and doing what I always wanted to do, Motorcycles have been my life since a kid, I always look back and think how lucky I am to be doing what I do.

I have lost count of the amount of Motorcycles I have built since 1975, but I have never lost the passion for these 2 wheeled machines and dont think I ever will.

My T100 Triumph Daytona was such a fun bike but- it needed constant servicing, but that was the fun of it, getting to know your Motorcycle and how things work. I used to be a Dispatch Rider in the City of London and also up in Birmingham, riding thousands of miles all over the country and loved it, I worked for many companies delivering things everywhere, and knew there was nothing like being your own Boss and having Motorcycles.

I do sometimes miss that job as I got to see so many places, in the UK and in Europe but, the Danger was outrageous at times but that is why the money was so good, as we took big risks in what we do, and in all weathers, some Rain, some crazy winds and plenty of Snow and Ice. A major decision that I made moving here was because the weather was so nice and no more cold Knees and hand riding Motorcycles.

50 pounds lighter and more hair LOL- Loved that old bike too, it was a 1953 Sunbeam S7, I sure loved that bike and it looked along the lines of a Harley but was British.

I was self taught in Mechanics and loved taking snotty parts and transforming them into something very cool and different and I was hooked from day 1.

I hit the ground running in 2000 here in Southern California and built a well known Motorcycle out of the CB750 Honda Four, many people used to stop me in the street and ask.

“What is that bike” And I would reply its a Cafe bike, I got ask so many times that I painted on the tank the word  Cafe  in Old English, with Gold Model paint, using a modeling paint brush, then I guess I got noticed all over the place and started getting magazine coverage.

Roll on to modern times and I am still creating affordable parts to complete builds and want to than you all for being my Customers and look forward to speaking to you soon.

There is never a day thats the same for me in this industry and i love that aspect, there are always things to make, draw, build or repair and as long as there are second hand motorcycles out there, then I am good.

Where do I see this industry going? Well of course I have now seen the electric designs and although they look cool, they have no sound, I dont think I would like a dead quet machine, I like the roar of an internal combustion engine, I also believe in loud pipes save lives as if a pedestrian steps out in the street and an electric Motorcycle is belting along-Well theres a catastrophic accident waiting to happen.

I have manufactured thousands of exhaust systems for these old bikes and am gearing up to design more affordable styles and all made here right in California not oversea’s where the majority of systems are made by people not even into Motorcycles.

So, thank you, from the Bottom of my heart for ALL your support, you are helping my continue to live my dream and I hope I can help you, even if its just problem solving over the phone,

Thanks for reading my little Blog, right now I am building a Brat style Custom motorcycle and hope to get it completed for the OG show here in LA, but the weather is against us right now but we shall plug on. I love All motorcycles and glad that you enjoy what I do.

 

Thanks again for 19 years, the 20th year anniversary will have to be a bike created I think to celebrate an awesome milestone in business here.

Until next time, have a super weekend ahead of you and hope to hear from you soon.

CHEERS!

Working on an old snotter that came from the Vesco Family

I pick bikes up from time to time that some owners just cannot get going, other shops have had a go and no joy, and I picked this old bike up a long time ago from the Vesco Family, Grandson of Don Vesco, I left it in storage for a while and wasn’t too bothered as this has not run since the early 1980’s.

Don Vesco was an American businessperson, motorcycle racer, and multiple motorcycle land-speed record and wheel-driven land speed record holder. He set 18 motorcycle and 6 automobile speed records during his life.

This bike is a real mess, no idea if it will run but am determined to get this inline four running again, need to know how the motor is before I begin to rebuild it into a cool ride once more.

It has had a hard life and has been from pillar to post and no luck getting this old 500 pound SOHC machine to run again, but I know I can get it sorted, just takes time and patience.

There seems to be leaks all over the Motor, the kick stand has seen better days and there is oil and dirt all over the bike, would love to know what life it has led.

Has a weird set of clip ons that wont stay clamped on it and the wiring harness is old and brittle as well as the usual repair using different colored wire etc, this is going to be a pain.

The tach cable looks like it ended its life a few years ago and the end cap drive unit is still stuck in the valve cover, thats a good thing else the oil would come out of there when it ran.

Some funky wiring going on with horrible plastic sleeve covering, thats all gotta come off right now, so strange what some people will do to their bikes in the shed.

Top triples had seen better days and someone had ground the handlebar clamps off so they can use some later clip ons, but they are about a millimeter to wide and wont clamp down hard, I shall go back to a standard triple tree and fit some scrambler bars I think, just to get this bike as a runner for a while and see how she fares, then- I can decide a little later to strip and build into a Custom Machine.

Everything seems to be covered in oil or grime and crappy clamps etc, its had a hard life, but my main objective is to first remove the shitty wiring and connectors etc and then fit a new harness, battery, coils etc and see if I can get this old girl to fire up again.

The coils had decided to crap them selves and the wire harness was as solid as a rock, the California Sun had dried it all out and this has to all be removed right now.

As you can see, there are different gauge wires that have been added to this harness, the Fuse box is knackered and temporary connectors all over the place, just really bad work.

The carbs will need tearing apart but for now I shall pull the bottom end out and fit New main jets and Idle jets and see where we go with a new battery and plugs etc.

So now its time to do what I like doing and will see if I can figure out all the bad things that have happened to this inline four over the years, hopefully I can resurrect this 70’s iconic machine.

And we begin, it does take a lot of patients but its worth it in the end, I have to see whats up with the Motor first as that at least gives me an idea at the cost involved to turn this into a great looking Custom Motorcycle and it sure warrants that, seeing it was in the Vesco family.

12 interesting facts about land speed racer Don Vesco

Don Vesco doesn’t fit neatly into a specific category of motorcycling, but the one thread that runs through his career is the quest for speed. He became famous for his land speed records in the 1970s and continued racing through the 1990s.

Here are a dozen facts you may not know about Vesco, who was inducted into the AMA Motorcycle Hall of Fame in 1999.

1. Vesco was born in 1939 in Loma Linda, Calif. During his lifetime, he was a dirt tracker, factory road racer, drag racer, motorcycle dealer, race-team owner and land speed record-holder.

2. He was mechanically inclined from a young age, tearing apart model airplane engines and making them faster by the time he was in third grade.

3. As a teenager, Vesco parlayed his mechanical skills into cold hard cash. He would buy old Cushman scooters for $20, fix them up and sell them for $25.

4. In his teens, Vesco fixed up a Triumph twin and entered his first official race, a local drag racing event. Then he took that same Triumph and started racing scrambles, TTs, and eventually road races on an old military airport outside of town.

5. One of Vesco’s riding buddies, and his archrival on the track, was future AMA Motorcycle Hall of Famer Cal Rayborn.

6. Vesco won a lot of local road races in the late 1950s and early 1960s. He caught the attention of Honda, which was just coming into the U.S. market. Honda hired him to race its rare and very expensive RC161, a 250cc, four-cylinder racer, to promote the brand.

7. Vesco’s relationship with Honda lasted until 1963, when he took an offer from Yamaha, which was also just getting started in America, to race at the United States Grand Prix (a non-points-paying international race) at Daytona International Speedway. He rode a works Yamaha RD56 250cc GP bike and won the 500cc class. Also loved his Norton Motorcycles too.

8. By the late 1960s Vesco had already been a factory rider for Honda, Yamaha and BSA. He was even a factory rider for the little-known Japanese maker Bridgestone in the 250 GP class for a short time.

9. In September of 1970, Vesco set the motorcycle land speed record of 251.66 mph at the Bonneville Salt Flats in a streamliner powered by twin Yamaha engines.

10. In 1975, Vesco broke the 300 mph barrier in the Silver Bird Yamaha (powered by twin Yamaha TZ750 motors). Then in 1978 he broke his own record, turning 318.598 mph in a twin Kawasaki turbo rig. That record stood for 12 years.

11. Vesco lost an eye after being hit by a rock while watching a sprint-car race in 1996.

 

12. He died on Dec. 16, 2002, after a long battle with cancer.

INDIAN SCOUT CAFE RACER MOTORCYCLE

 

Today I thought I would add one of the finalists in the Wrench build off, this fella below PJ Grakausas is one of the finalists and the Indian Cafe Racer he created is a real nice piece of work and needed to be shared, some of the images are credited to Return of the Cafe Racers, Hot Bike, Silidrome and Pintrest.

Up until now most of the manufacturer build offs we’ve seen have been between professional workshops or dealerships. With ‘The Wrench – Scout Bobber Build Off’ Indian motorcycles have taken more of a grassroots approach. Recognising the importance of the ‘backyard builder’ Indian invited custom enthusiasts to submit concepts of how they’d like to customise a Scout Bobber. From the 100+ submissions received a panel of judges including Roland Sands and Jason Paul Michaels selected 12 semi-finalists. Then through a public vote, 3 winners were given a 2018 Indian Scout Bobber and a $10,000 USD budget. Ohio based safety inspector PJ Grakauskas was one of the 3 chosen builders and this is his fully faired ‘Scout Cafe Racer’.

12 weeks after they were handed the bikes all 3 ‘Wrench’ contestant builds were unveiled at the 2018 Sturgis Motorcycle Rally. Seeing a cafe racer styled bike at an event that’s traditionally cruiser and chopper focused instantly piqued my interest so I reached out to PJ to learn a bit more about his project.

Hi PJ, Why don’t we start with a bit about your history with building custom bikes.

I don’t build bikes full time, it’s just an expensive hobby for me. I grew up surrounded by motorcycles my whole life, but mainly racing off-road. When I started building custom bikes it was to spend more time with my dad. I took parts and bikes from our barn and used them to make unique motorcycles I wanted to ride.

What was the process leading up to being selected as one of the top 3 builders?

It started with entering the contest. We had to submit design concepts, essays, and previous build experience. I drew up my ideas and had my friend Cory of Moto Mesa Designs tweak it and turn it into a gorgeous digital rendering. From there it went to public vote. After I was awarded as one of the top three I went to Bair’s Powersports (our local Indian dealership) and picked the bike up.

Do you have any prior history or experience with modifying Indian motorcycles?

I don’t have much history with them prior to this build. But I do know THEIR history. I’m honoured to be able to build a bike with such a rich heritage.

Did you expect the bike to get a good response at Sturgis?

I really didn’t. Sturgis isn’t known for cafe racers or sports bikes. The crowd is very v-twin oriented. So I was happy to get a great response and all the pats on the back. Having my peers at Michael Lichter’s Passion Built Show give me praise was also a nice surprise.

Anyone who has ridden an Indian Scout will appreciate just how much work was required to create PJ’s Scout Cafe Racer. What’s most impressive though is that the bulk of this build took place in a small workspace out the back of his home. The most obvious modifications are, of course, those to the bodywork. The full fairing is a custom-made fibreglass unit that PJ designed and was finished by Kacey Elkins of Krossover Customs. PJ tasked Raw Iron Choppers with cutting and welding knee dents into the stock fuel tank while he built his own tail section and had the seat covered by Ginger at New Church Moto.

Getting the Scout sitting right was an integral part of PJs cafe racer transformation. To do this he installed a set of ’07 GSXR forks using Cognito Moto 50mm offset triple trees. To level out the frame, he also fit a pair of 12-inch Ohlins shocks. Spoked wheels were high on the list of must-have items so he fit a pair of 18 inch Sun rims. The front is laced to the GSXR hub while the rear is fixed to an aftermarket hub by Indian. Woodcraft clip-ons wearing Avon grips set up an aggressive riding position and the stock footpegs have been relocated for comfort. Pj completed his handling modifications with Pirelli Sport Demon rubber and a full brake upgrade using gold anodised parts from Beringer.

No cafe racer build is complete without at least a little additional horsepower, and PJ’s Scout Cafe Racer is no exception. The bike now runs a DynoJet Power Commander tuned to get the most out of a Zipper’s intake, custom 2-into-1 exhaust and Supertrapp alloy muffler. Those with a keen eye will also notice a change from belt to chain, another modification done to achieve a classic bike aesthetic. The choice of chain colour was to tie in with the stunning black and gold paint scheme laid by Krossover Customs.

A great mid sized machine with plenty of guts in the right hand and something I would love to ride myself, nice to see lines that flow and motors that Go, this is an affordable bike that will last many moons for sure and I hope that I get to see it at some point around the circuit of shows etc.

Make sure that you give this fella a thumbs up when you see this machine as he really hit the proverbial nail right on the noggin with this bike and its a great piece to look at.

There are so many great bikes being built and you think that you have seen pretty much all that can be done but, this is proof of the pudding right here that it is not.

I am sure this is comfortable on long rides and, even more fun when you get into the twisties, love to sling my leg over and see what the power transfer is like.

Still, the only flaw that I can see is, after all that work, nobody puts any time into making a side stand that touches the ground, I have made many of these as having to carry a chunk of steel or aluminum with you all the time is not fun.

The Gas tank is another story, it really looks so Nostalgic and just loved the lines that the Gloss Black gives it, a well put together motorcycle thats for certain.

You cannot go wrong with Ohlins suspension,this will soak up the deviations in the tarmac like a New Coupe De Ville.

I like the way the rear sets are mounted and the whole bike flows with that full fairing set up, the swing arm is sturdy enough to take on any road that you take this bad boy onto.

Beringer make sure that you get plenty of stopping power, their products are up there with the best, I should know, as I am a dealer for their products and this looks really cool.

Hope that some of you out there, get to see this Indian Cafe Racer, its a good put together machine that needs to be seen and heard for sure, below are the renderings that got PJ started.

Out of the 100 or so submissions, 12 semi-finalists were showcased online for a fan vote to determine the final three finalists. These three builders got a full paid trip to Minneapolis for an unveiling party of their customized Scout Bobbers at Sturgis.

 

My Triumph Thruxton Daily Ride

My 2013 Triumph Thruxton has served me well over the years, compared to my vintage triumph, this is chalk and cheese in the reliability league and the bike has given me many thousands of miles of fun and still does. it has now had 3 different guises since I acquired the bike from Socal Motorcycles and it certainly gets a lot of attention.

I bought the bike but it was the British Racing Green Color scheme, I’m not a fan of green but, stuck it out as long as I could but, saw so many this color, that I had to do a few things to make it into the bike I really want to ride. I first made a Diamond Upholstered seat for it, long before people were doing it and got a lot of compliments, then I set about designing reverse Cone megaphones in Stainless Steel, and that sure did get people looking.

Next up was to remove the swing arm and weld tubes in to make it look like drilled holes, then re-chrome it, soon as I did that, I fitted New Alloy Rims, wide 5.5 rear from Canyon of the TT range and this really filled the swing arm out nicely.  I repainted the gas tank and made side covers as well as the front fairing and the rear cowl, making the seat fold down to allow access to the storage compartment.

The New rims were such a change in handling for this machine, the fatter tire grabbed the tarmac like glue and this was a fun machine to now take out and enjoy .

I loved slinging my leg over this 900 and tear away up the road with a smile on my face, it was now a machine that was starting to get dialed in to how I wanted it, but there was another look I wanted after a while, I mean I also build and design bikes and parts, this is my business card, so always like to change things up and now its on its way to its third livery.

I removed the fairing and was contemplating a different look, so it came to my mind to fit An Alloy Gas tank and side covers, but, I wanted to make an alloy rear cowl for the bike, so with Egg shape Hammer in Hand I set about and made a rear cowl, then frenched a pocket into the rear cowl to alloy for a Vintage light but have a LED insert in that light, old with new.

Loving the look of this and am glad that i went this route, this time I wanted to change the seat padding and went for a soft Tan leather with Diamond Stitching.

Now this sure is comfortable and feels way better than the old one as I simply wore it out with my fat arse sat upon it all the time and this is now comfortable once more.

I now have my Alloy Gas tanl on the bike and sometimes I fit different seats when I make them to check for fitment and this bolted right up with no issues at all.

Right now here she is sat at home and I really do like the way she looks, Classic styling and its a fun machine, this afternoon I shall change out the grips to go with the New leather seat and give the bike a better flow and color coordination. I shall take some pics later in the week to see how they look and feel first.

The front fender I made from an old BSA mudguard and then welded some brackets to the side and the contour is just how I want it too, came out well and love the look of it. if you look at the lower part of the chassis, you see I have my own hand made Bash plate that I made out of Aluminum and then added a Bottle opener, just in case ya stuck when you are out camping.

 

 

The Zard pipes sound great and may polish them to get a mirror finish to accentuate the rear cowl that I made as I love how this has turned out as a one off design.

You will also noticed that I wrapped my headers, this was something I wanted to try with an Aircraft application and rather than the old school wrap, I thought that this would look pretty cool as a slip on heat Sock, and sure glad I went this route as these Performance pipes get bloody hot when riding.

I also have a set of Works Performance  piggy back race shocks to soak up the bumps, not cheap but my old shocks I had that were TEC, Blew the Nitros out of them when I was in the Canyons on a few pot holes, so a more expensive and professional set were purchased and I am also a dealer for Works Performance and so glad that I have these now as it is night and day on suspension set up.

I also designed and made the Knuckle Duster Heel guard, and offer that on my website as well, I then blanked off the rear passenger foot peg hangers to tidy that area up a little.

Bike now sits well and I am happy with the look, I will be fitting the grips and will show the pics on here so you can see what they look like.

I went with some Cole Foster grips, looked at many but thought that these would be best to go with my leather seat, and am happy with the choice and are really comfortable too.

Really happy with my choice and my hands will thank me later too.

Sat next to My Hot Rod, the Triumph looks happy in its new set of clothes, looks a different bike too, still a little more I want to do as I go along but, thought that I would share some pics on a Blog and see if you like what I have done.

Here is a list of what is on here.

Motone Alloy Gas Tank

Motone Side Covers

Cole Foster Grips

Custom Clip 1″ on’s

Wide wheel kit from Canyon

Custom Drilled and Chromed Rear Swing Arm

Upsweep Rear Polished Alloy Caliper Bracket

Zard Stainless Steel Exhaust Kit

Titanium Aircraft Heat Shield Sock

Speed merchant Finned Engine Covers

Wave Brake Rotors

Beringer 4 pot Brake Caliper

Hand Made Alloy Mudguard from a BSA

Hand made Seat with Leather Upholstery

LED internal turn signals and 6000 Lumens headlight

4 inch Chromed Fog light

Custom hand Made rear Cowl with LED Rear Light

Works Performance Piggy Back Racer Shock Absorners

Hand made Knuckle Duster Heel Guard

Joker bar End Mirrors

Lithium Ion battery by EarthX

K&N Pod Filters

Fender Elimination kit

Custom Horn

Hand made Alloy bash plate with Bottle Opener

Power Commander

Irridium Spark plugs

LED rear Turn Signals

TEC Front Steering Stabilizer

Custom Machines Foot Pegs

Rear Blank Off Plates On Hangers

 

 

 

 

BAAK MOTORCYCLES CUSTOM TRIUMPH BONNEVILLE T120

 

THE TRIUMPH BONNEVILLE T120 More fun that watching a dozen frogs in a Fly factory.

The Triumph Bonneville T120 made its debut in 2016, the motorcycling world had been expecting some big announcements from Triumph so it wasn’t a complete surprise, but the T120 was perhaps a little more than most were anticipating.

baak3

At its heart the Bonneville T120 is fitted with an all-new liquid-cooled parallel twin with a SOHC, 8 valves, a capacity of 1200cc, a bore / stroke of 97.6 mm / 80 mm, a compression ratio of 10.0:1, multipoint sequential electronic fuel injection, and a 270° crank. There’s 79 bhp (at 6550 rpm) and 77 lb-ft of torque (at 3100 rpm), fed to the rear wheel via a 6-speed gearbox and an X-ring chain.

baak18

Reviewers overwhelmingly loved it. There was a clear and distinct improvement in build quality throughout, and rival motorcycle manufacturers like Harley-Davidson, BMW, and Moto Guzzi had been put on notice.

BAAK MOTORCYCLES

baak16

BAAK Motorcycles was founded in Lyon, France in 2012 by Rémi Reguin, it’s since grown to employ five, and the company enjoys a global reputation both for their custom motorcycle builds, and for their in-house developed motorcycle parts for Royal EnfieldMoto Guzzi, and Triumph.

baak15

THE BAAK MOTORCYCLES BONNEVILLE T120

baak5

The new T120 is the current motorcycle of choice for BAAK, in fact they’ve probably built more customs using it as a platform than any other garage in the world. They built this bike for a customer in Spain, his main request was to use a British Racing Green on the fuel tank, as a hat tip to the cars of his childhood.

baak6

British Racing Green, commonly abbreviated as BRG, is a perfect color for a British motorcycle with heritage like the Bonneville. The team at BAAK matched the fuel tank with a medium tan leather seat, side bag, grips, and gators, with brushed steel knee-indents on the tank.

baak7

The plan was to lower the bike a little and tighten up the handling, so a pair of Shock Factory -20mm shocks were fitted in the back, and a machined aluminium flat triple trees were fitted up front to proportionally lower the front end.

baak8

A new 16″ rear wheel was installed and both ends were fitted with Avon MKII tires, giving the bike and vintage look with the benefit of modern tire compounds. A MotoGadget ChronoClassic dial was fitted carefully into the back of the headlight unit, a nice reference to instrument fitment on vintage British motorcycles, and the team at Baak are currently working on a plug-and-play system for others who want to replicate the look.

baak10

The original handlebar was swapped out for the Baak N°1 wide stainless steel unit, with machined aluminium handlebar clamps, and a mini brushed stainless steel rear mudguard with license plate support – significantly better looking than the factory fitted unit.

baak20

Up front theres a longer stainless steel front mudguard with aluminium supports, Mini LED blinkers from Motogadget, a Monza-style gas tank cap, Beringer Aeronal front brake discs, and proper mirrors left and right.

baak21

The completed bike is a tasteful custom, Bobber-like in some respects, with combined British and French heritage, and a future that will be based in Spain. Also this is a very unique machine and wanted to share this with you as a blog today on my website. www.carpyscaferacers.com

baak12

It takes a lot of thought and sketches before you even come close to a final phase drawing of how you want a machine to look and also, the budget of the customers is a huge part of any project, but this time, the froggies got it right on the money.

baak9

So as I close this for Thursday, hope you all have a great day, the weekend is not too far away now and I know you are itching to either ride your 2 wheeled machine, or jump in the shed and start wrenching to produce your own creation.

baak

Thanks for stopping by and if I can help with anything for your machine, even if it is advise, I am here. 714-598-8392 and you can even Text me on that to save more time too.

baak3

Right I am off to the shed myself as I am building a project, so, as the Terminater used to say.          ” I’ll be BAAK”

 

 

Ian Boyds most amazing collection of Vincents.

Well, just as you think there cant be anything else out there that will make my eyes open wide, my mouth hit the floor and just stand there trembling, but there most definatly is a really cool Museum that I hope to visit sometime, I used to live in Australia and loved the whole place, the food, the weather, the roads , the people and their passion for automotive collections.

Now if you ever get to Jurien Bay, which is about 2 hours North of Perth, then go and see Ian Boyd, as he has the largest Private collection of Vincent’s in the World. 46 in total, Holy Moly, I mean these bikes were built from 1928 up to 1955 When peter Vincent built the first model when the Ford had only just bought out the Model A.

And to see HRD’s- wow rare indeed, Howard Raymond Davies is where the Monogram derives from and to see these rare thoroughbreds is a treat indeed. Also Peter Vincent the Pioneer of these motorcycles rode his own bike to Victory at the 1925 TT at the Isle of man, stamping some authority in the 2 wheeled manufactures.

Collectively Ian’s museum has a net worth of over $5 million and will only get higher as these machines gain in value every year.

There’s not many people who wake up every day and eat breakfast overlooking a huge array of vintage motorbikes and vehicles. Former cray fisherman Ian Boyd built his house to accommodate his enormous collection, nearly 85 in total, and it truly is a sight to see so many vintage motorbikes lining up side by side.

Ian is a well-known character in Jurien Bay and opens up his home to bike enthusiasts from around Australia. He doesn’t advertise, it’s just word of mouth which brings people to his door.

“I love it, I am a people person and these motor enthusiasts are on the same wavelength as me. Now I’m retired it’s a great way to pass the time of day, just swapping stories,” he says.

“Most of these bikes were built between 1936 to 1955 and they are all British Vincent bikes. My favourite one used to be owned by a Siam prince who also raced cars. I reckon 800 people every year come and see my collection and I get them to sign my visitors book.”

Ian arrived in the town in 1985. He is passionate about motorbikes, there’s even an engine on his kitchen table. It’s a project he’s been trying to repair for months.

“I just cook around it,” he laughs.

“This is a great town, the beaches are safe, everyone is so friendly. Jurien Bay is paradise and I don’t want too many people knowing about this slice of paradise.”

WEST Australian Ian Boyd did not have any grand ambitions when he decided to start a motorcycle collection. He didn’t even consciously decide to focus his efforts on Vincent motorcycles. His collection started with one Vincent and, well, one thing led to another.

That was 29 years ago, when Ian was a cray-fisherman pondering how to keep busy in his retirement. He has since amassed such an extraordinary collection of Vincent motorcycles that it is regularly referred to as the best in the world.

dav
dav

And it’s difficult to argue with that assertion. Of all the models built by the revolutionary but sadly short-lived British high-performance motorcycle manufacturer, Ian owns at least one of every model — except one. The ultra rare White Shadow has so far eluded Ian’s reach. Only 15 White Shadows were made, and their rarity and collectability were on show last year when a White Shadow (originally painted red, on special order) sold in the USA for $434,000.

ian2

Not that anyone visiting Ian’s custom-built bike display showroom, under the main roof of his home north of Perth, is likely to complain. For the most part, visitors are gob-smacked.

Most bike collectors would give their left arm (and probably part of their right) to have just one Vincent in the shed. Ian has 39. And perhaps even more extraordinary is that you could remove all of the Vincents from Ian’s collection, and you’d still be left with a classic European bike stable to die for. (I’d been ogling the Vincents for a good 15 minutes or so before I noticed the Manx Norton — although I had noticed the 1970 E-type Jaguar).

But it’s the Vincents that steal the show. From a 1935/36 HRD TTR works bike through to Black Shadows and a Black Lightning, and on to a late 1990s RTV 1200 re-creation, Ian’s bikes tell the Vincent story from pre-birth to stardom, and then from financial oblivion to attempted reincarnation.

ian3

 

CAPTION: It would be difficult to name the most famous of Vincent’s bikes because almost all of them were extraordinary and all have become collectable classics. But the Black Shadow, launched in 1948 and capable of 125mph, is a star. It was, at the time, the fastest motorcycle in the world. Note the air-cooled twin front brakes (drums on both sides of the wheel) and the unmistakeable Vincent V-twin engine. All the Black Shadows supposedly had black engines — although this one of Ian’s does not. “They were short on money by this stage, and couldn’t afford the paint,” he told us. Alongside the Black Shadow is an RTV1200; an Australian effort from the late 1990s intended to recreate the Vincent by blending that great old-motor styling and best-available technology for chassis, suspension and aerodynamics. The bike worked, but the business venture didn’t. Ian’s is one of only a handful that were made before the whole idea went belly-up.

For the uninitiated,  the Vincent motorcycle story is a British story — but it’s one with a strong Australian connection.

But first, let’s back up a little.

The first Vincents wore a badge that read ‘Vincent-HRD’, with the ‘HRD’ prominent and the ‘Vincent’ under-stated.

HRD were the initials of Howard Raymond Davies, a British soldier who survived being shot down and taken prisoner of war in World War One and who went on to design and sell high performance motorcycles under the HRD name.

His bikes were mostly powered by JAP engines and were successful on the racetrack. (For the record, JAP engines are not from Japan. JAP was a very English firm created in the early 1900s by a chap named John Alfred Prestwich who used his initials to name his business, as was the practice in those days.)

ian4

CAPTION: The Black Lightning was a lightweight sports version of the Black Shadow. It weighed 170kg. The folks at Vincent were cutting edge in many areas of technology, but never fell for those new-fangled telescopic forks that other manufacturers got into.

The economics did not work out for HRD and Mr H.R.Davies, and the HRD name changed hands a couple of times, ending with another Brit by the name of Phil Vincent. Now, Phil wasn’t short of a quid — his family had money from Argentinian cattle ranches, as one did — and had already built a bike of his own. He’d also designed and registered a patent for a cantilever rear suspension set-up.

But he saw the economic sense in continuing to use the HRD name, since it had established significant racetrack credibility. Phil used the name Vincent-HRD from 1928 through to 1950, then changed it to ‘The Vincent’ — mostly because the company’s marketing effort was aimed at America, and ‘HRD’ was seen to be too similar to Harley-Davidson’s ‘HD’.

ian5

CAPTION: The 500cc Vincent Grey Flash is generally known as a limited-edition race bike from 1950. Only 32 were made and, of those, just three were built to be road-going. This bike of Ian’s is one of those three and was sold new in Argentina. Note the cantilever rear suspension, a trademark of Vincent motorcycles. Company founder Phil Vincent patented the cantilever design in 1928, at age 20.

The Australian connection to the Vincent story comes from a brilliant Victorian engineer by the name of Phil Irving. Phil had a motorcycle workshop in Ballarat in the late 1920s but, when the Great Depression forced him out of business he looked further afield for opportunities. A rather unusual opportunity came along in 1930 when he found himself being the mechanic and pillion on the back of a 600cc side-valve Vincent-HRD, undertaking a UK-to-Australia-and-back promotional ride.

ian6

CAPTION: The Rapide was Vincent’s first 1000cc V-twin, literally made by sandwiching two 500cc singles together. Parts from the 500 and 1000 are interchangeable. The Rapide was a revelation, and catapulted Vincent beyond 100mph and into the realm of superbikes.

That gig got Aussie-Phil Irving to the UK, and also made him visible to Brit-Phil Vincent. One thing led to another and, before long, Aussie-Phil and Brit-Phil had become great mates, and Aussie-Phil found himself on Brit-Phil’s payroll. It was a successful pairing. In 1934, Aussie-Phil designed an overhead valve 500cc engine which became the basis for The Vincent Meteor and, later, the more racy Comet 500. But a greater contribution was yet to come. In 1936, or so the story goes, Aussie-Phil noticed two Comet 500 engine drawings lying on a table. The drawings were coincidentally resting in a V-formation, looking all the world like a 1000cc V-twin.

Aussie-Phil and Brit-Phil agreed mating Comets was a grand idea, and so the 1000cc Vincent motor was born, in turn giving birth to the 45-horsepower 110mph Vincent Rapide. The Rapide evolved through multiple incarnations over the years including the legendary Black Shadow and the Shadow’s high-performance sports variant, the Black Lightning, which used aluminium in place of steel wherever possible and weighed in at a startling 170kg (compared with the Black Shadow’s 208kg).

ian7

It is generally (but not universally) agreed that American racer Rolland Free was riding a Black Lightning in 1955 when, wearing not very much at all, he set a world record speed of 184.83mph at the Bonneville salt flats.

Amazingly, just as Rollie Free and that great photo were making Vincent a household name across the world, the end was nigh. Late in 1955, Brit-Phil announced that Vincent’s bike-building days were over.

(Footnote: Aussie-Phil returned to Australia in 1949 and continued in the engine-design business. He was famously recruited by Aussie motoring legend Jack Brabham in 1963 to design a Formula One engine. Aussie-Phil did just that — a three-litre V8, supposedly with BSA Gold Star cam profiles — and Jack won the 1966 Formula One Driver’s Championship and the Manufacturers’ Championship using that engine. Phil died in 1992 at the age of 89.)

ian8

Below is a few more great bikes that I would love to own just one, brilliant effort and quick the nest egg for him and his family, although I sure hope he doesnt sell them all, just a great place to go and visit for sure.

ian9

So much Classic iron is a super rare find for many of these machine, so the opportunity to go and visit Ian would be such an entertaining experience to be honest.

ian10

Just look at the great choices you could have to ride everyday, an Aladdin’s cave of awesomeness in every conceivable configuration.

ian11

Even a sprinkling of cool Automobiles too, Love the Drop head Coupe as well as the 1/4 Midget Track car.

ian12

CAPTION: Ian might be a hoarder, not a trader, but sometimes he needs to shed something. This New Zealand McIntosh-built Egli frame with 35mm Ceriani forks and Works rear shocks has become excess to requirements and Ian is trying to find a new home for it. (You’ll need to bring $6,500 with you.)

ian13

California Moto Market This Sunday, Hope you can support it

We’re back and bigger than before! We just finalized our vendor list and are SO excited to share that we have 28 brands represented at the October 1st California Moto Market! Check out who will be there:

girls on bikes Life

Atwyld – BH&BR – Biker Gear Club – Cardo Scala Rider – Carpy’s Cafe Racers – Dainese – Fable Riders – GRBG Made – Gigi Montrose – Heyltje Rose – Hinterland Empire – Jackalope Trade Shop – Maus Taus – Modern Moto Magazine – Moto Chic Gear – Motorcyclist Magazine – OC Motorcycle – Rebel Soul Collective – Renegade Products USA – Roland Sands Design – Shoei – Speakeasy Original – Support Badass Babes – Stellar Moto Brand – Wasted Times – Wind and Throttle – Wild Ones Ride

show

We have a “Ride ‘em In” Ladies Only bike show running from 12pm to 2pm: Just ride up to the gate, grab a number and a tag and try your luck! Our 8 awards will be in the following categories: Best Vintage, Best Sportbike, Best Cruiser, Best Classic, Best Paint, Modern Moto Favorite, LB Lita’s Choice and People’s Choice. There are absolutely NO rules (other than Ladies Only) so if it’s got 2 wheels and an engine… its in!

Food trucks, Raffle prizes galore, Ducati test rides, music, beer probably.. whats not to love?!

This is Hosted by California Moto Market & Ducati Newport Beach as well as Triumph Newport Beach.

Of course we shall be there Carpy’s Cafe Racers, and Promoting Women riding too.

girls on trumpy

This will be great and I always promote women riders, My Girl rides and my buddies in our 59 Club O.C. section ride, so if you can come out, say hello and it will be great to see you.

girlsonbikes4

We have a booth there, just like for the Brown/Tan Eazy up and we shall have Apparel on display for you to look at.

Have fun this Sunday and support this event, you may win a prize too.

You can call or text if you need any more information at 714-598-8392, Look forward to seeing you, come by and say hello as it will be great to meet like minded folk.

 

Old video of me building the Speedmaster Cafe

Hey there Gang

Many people email me and ask about the bikes I create, the parts that I make and offer and many also ask for advise on their machines.

I am still learning after almost 4 decades of being into Motorcycles and thats what I love about it.

Motorcycles will always be a big part of my life, i have met many people from all over the Globe, I have also built machines and sent to so many far off countries, it simply amazes me sometimes, but this is my passion and I continue to feed my passion with these fascinating 2 wheeled machines.

Below is the Speedmaster cafe bike that I created, it now resides on the otherside of the world and in fact, I met the owner this year as he travelled the USA and he came to one of our 59 Club monthly meets, so always cool to meet clients.

 

If you need help, advise etc, please feel free to drop me a line at carpy@carpyscaferacers.com as this is what I do and if I can get your Motorcycle back on the road, it makes me feel good and you great.

keep doing what you are doing, take your time, building bike is a learning curve that takes a long time to conquor and I am still trying to get to that stage after all these years, but its a fun journey and hope that you stick with me through it.

Here is the little Video for today, enjoy……

 

 

Ace Cafe in Florida

Whilst I am still in The UK spending time with my poor Mum, I thought I would try and add a video etc for the Blog and keep you up to speed on other things.

The Ace cafe for instance,
Check out the below video link to the recent “Ground Breaking” ceremony with the Mayor of Orlando, Buddy Dyer – some great vehicles turned up for the event! At some point it was “Gentlemen Start Your Engines”, so that day will forever now be known as the “Ground Shaking” event and be held annually! It is planned that the cafe be fully operational in October.

 

Ace Cafe, a British hub for vintage-motorcycle and custom-car events, plans to open its first U.S. complex in downtown Orlando within a year.

Owners of the Ace brand, with its “petrol and speed” cult following, have signed a long-term lease for acreage and several industrial buildings facing Interstate 4 at Livingston Street, next to the downtown Lynx and SunRail stations.

 

I think it will be an iconic, symbolic destination,” said Mark McKee, who bought the Ace Cafe rights for North America several years ago and since has staged auctions and events with celebrities, including Jay Leno and Billy Joel.

Initial plans call for a restaurant and bar, a shop for Ace Cafe’s Rockers merchandise and a motorcycle dealership, which would likely specialize in European brands. Ace might build a motorcycle museum and repair shop later

 

The London Ace Cafe draws thousands of motorcycle and car enthusiasts to its 400 annual events. The Orlando operation would be larger, with 3 acres and more than 16,000 square feet of space, executives said.

The new cafe would provide a meeting place for car and motorcycle fans, with surface parking for fans to show up in their rides and garage parking nearby. Events could include everything from Old Ford Night and Mini Cooper meetups to gatherings for motorcycle clubs.

 

Thomas Chatmon, executive director of the city’s Downtown Development Board, said the project is unusual for the central business district because it serves as a destination for both the general public and for fans of motorcycle, car and truck shows. In addition, he said, it will reuse an existing building. The H2O Church now meets there, and McKee said he is in discussions with church leaders about accommodating them on the site.

The process of bringing an old building, the brick-clad 1926 Harry P. Leu Building, up to currentstandards is rigorous but attainable, Chatmon said. Meetings that Ace executives have had so far with the city, before applying for necessary permits, have gone well, he added.

The flagship Ace Cafe in London operated from 1938 through 1969, attracting “cafe racers” who literally raced through city streets to cafes that catered to the emerging American rock scene.

The idea was resurrected in 1994 when former mounted policeman Mark Wilsmore organized a Rocker Reunion for cafe devotees. Three years later, Wilsmore reopened the cafe, which has been featured in books, films and a BBC series. Last year, he was instrumental in opening an Ace Cafe in Beijing. The Orlando cafe would be world’s third.

Orlando stood out from about a dozen possible U.S. locations because of weather, internationalvisitors, British tourists and proximity to Daytona Beach, with its speedway and Bike Week crowds.

“It was between us and Las Vegas as we identified this site in October 2011,” said Bobby Palta, vice president with the CBRE brokerage in Orlando. “The lease negotiation was the hardest I’ve ever done. But 18 months later, we had a signed deal. In the end, Orlando won the day, and the Ace will be coming to downtown.”

 

Ace-Cafe-Orlando-rendering

Speaking by phone from the original Ace Cafe last week, Wilsmore said he and McKee, who lives in Kansas City, visited about 20 prospective sites in Orlando before choosing the spot on Livingston Street 18 months ago.

“Our agent had prepared a portfolio of properties. We jumped in a rather large vehicle. We would pull up to one and say ‘Keep driving.’ Pull up to another — ‘Keep driving,’ ” the Londoner said. “Once we got to this site, well, what we said would really be an expletive. It was spot-on — absolutely bang-on.”

Walking through the high-ceilinged building where the H2O Church now meets, McKee outlined plans for an industrial-style space with dining priced for repeat business instead of special occasions. He said his design team intends to restore an existing stage for concerts; build space for fundraisers by the 59 Club, which is billed as the largest motorcycle club in the world; and create offices for Ace Cafe North America. He could not say how much the company plans to invest in a renovation.

“We purposefully stayed away from International Drive because we wanted urban buildings to fit with the Ace brand,” said McKee, a former restaurateur and franchise developer.