The Old Koppa Kafe was a fun Custom to create in my Garage.

No idea where the time has gone to be honest, but I always loved creating this machine, just because it has so many great Original parts on it that really did make people turn heads.

So I started off with a bunch of parts and already had the idea of how I wanted this, as the KOPPA KART was a famous Barris Kustom Truck that I had loved as a teenager and wanted to have some Copper Influence on this Motorcycle, but I had to do a ton of preparation to the Honda Duplex cradle frame to make sure all looks good when painted.

 

There was a lot of hand sanding and grinding of old Factory welds to try and make this Chassis as smooth as I possibly could, but also, I cut the neck and added a couple more degree’s to the rake, not too noticeable but I didn’t want it too aggressive, and I think this came out perfect for what I was looking for.

Also made up a Hoop and welded that to the frame, nobody was doing this back then and wanted it to finish of the seat that I was going to fit to it, and welded a bracket at the rear so I could attach the seat cowl and make it sturdy. But the most work that really needed some attentions was how was I going to extend the stock gas tank 5 inches, as I wanted a much longer fuel tank and thought that I may as well use some of my old spare gas tanks to cut up and make the change.

This is no easy task but, I was fortunate to have a bunch of K series Petrol tanks laying about in my garage rafters and thought the best way was to keep the front end and extend the tank backwards using sections from a couple of old gas tanks.

You can see the section cut and of course had the gas tank media blasted to get all the paint off so at least there was clean metal to work with, this will also have hammered knee inserts to give it that touch of Nostalgia of TT racing days and I was glad that I did go this route in the end.

You may not notice the stretch but its way past the original mounting bracket on the frame, you may also notice that I cut the rear exhaust and passenger peg supports down, this was to clean the lines up and allow for the lower part to become a bracket that my Italian rear Sets could attach too, I also braces gusseted the frame under where the gas tank sits just to give the frame a little more rigidity.

Here is the cross bracing that I did and used the pieces I cut off the bike, so it all got re used into this creation and I had not seen anyone do this before too so another added attraction I guess?

 

Putting this machine together in the garage was pure fun, I really did love the way the old girl was being revamped and as you can see, I did a lot of detail as at the end of the day, I was building bikes for a living now and this would be a great business card bike. many cool Parts and I used a pair of 18 inch Aluminum rims that were for a CB750 Automatic, of course I used to rear rims and then polished them to a chrome finish to give it a little more Bling.

So many hours were put into this and it became quite a challenge at times, but kept pushing on, I had to retap most of the thread holes as metalflake gets everywhere when you paint it and not use a booth, but I kept being persistent and it paid off, I used stainless Allen head Bolts through out the bike too, not cheap at almost a dollar per piece but makes the bike for sure.

Hand polished all the Aluminum and it took me forever to find an intake Plenum, I had one but it just would not fit, found out it was a Suzuki one, so thought to my self, ” Where the hell am I going to locate one of these Plenums for a SOHC?”  Then I got an email from a guy in Sweden who had a Suzuki and was Supercharging his but, his Plenum didnt fit and he thought his may be for a Honda.  So we traded and sure enough, when I tried to fit the Swedish one, it fitted like a glove. What were the chances of finding another eh?

What a piece of art it is too, so happy to be able to fit this to the machine and another tick off the list of things that needed to be accomplished to get the bike to the standard that I was after.

Just look how cool this Copper Metalflake looks, we used 3 pounds of the stuff to get the required depth that i was thinking of and a ton of clear coat was used to smooth it all out, but that Polished Aluminum offsets the Copper really well , what do you think?

I really was happy at the way the bike sat and looked and bit by bit I would get things accomplished, then I would push it onto the driveway to see how it looked in natural light.

I had Machined the front Lower forks and rebuilt them with New uppers, springs and this was a neat and unusual look as I had never seen anyone machine lower forks on a 750 before.

When I had these on the bike at Shows, people would ask about the forks and send me theirs to rebuild and give it that Custom look, it sure added some Custom touches as I painted the grooves Copper to go with the rest of the bike.

Finding someone to drill the correct hole on the stator cover, turned out to be a pain in the arse, I had one so called shop in another state have a go and messed it all up, so I did it my self and under cut the hole then used a drum sander to keep adjusting until the oil seal fitted tightly, and there you go, job done.

I had an Old Drouin Supercharger that was once going to go in an old chopper/drag bike and after I got all the parts I knew what bike I was going to build.  Now, the Motor I had was a fully Blue Printed motor, costing 7000 Dollars many years ago and this was perfect for the bike and thats how this came about.

I had a local company water Jet a bracket out of 7075 Aluminum and gave them a paper template, this worked out and treat and bolted right up to the SOHC motor with exact clearances, I simply Polished the bracket once everything was test fitted and you can see the Crank Pulley at the bottom fitted perfectly too.

All fitted and this Mechanical Washing machine looked Bloody awesome all hanging out of the engine on the Left hand side, it is Belt driven too so pretty quiet to be honest with a neat Polished Aluminum Belt cover for added coolness.

Yeah, it was an intricate bit of Kit to begin with but loved looking at this Motorcycle I looked at it as a piece of art and used as many pieces from a 1969-1978 Honda as possible.

I hand Hammered the knee Inserts using a Tear Drop Hammer from Eastwood Supply and this came out so nice with the Copper paint and boy did it shine when the Sun hit it too.

There is a lot of work here and those who have tried to Polish their Hubs will know what I am talking about, I also added a Double Chain and Sprocket set up as there was a lot of Torque here in that engine, I couldn’t locate one for the longest, but Azusa Chain helped me as this was for an Old Lathe and converted it to the bike and worked really well, ran a slightly wider sprocket carrier for the offset to be right.

I also fitted an Old Lockart Oil Cooler to the bike as it will run 15% cooler with that fitted and as the Oil Filter Housing has some broken fins, I cut them off and polished the body and it looked pretty good to be honest. I ran Braided Aircraft lines to the cooler too some Dash 12’s.

That’s an Original Lockhart Cooling Radiator too, I made a thick Aluminum Bracket to mount it to the Horn bracket and then polished it to look like chrome, it worked really well too.

That tank turned out so well, I used Por15 to seal it before painting and then pressure tested it at a Radiator shop, C.F.R was for Cafe Racer but in the style of the old H.R.D Motorcycles of years gone by.

This was My first attempt at making a Fiberglass front fender, since then I have sold over 500 of these to Customers all over the world, its 22 inches and has a bead all the way around it.

Cant get enough at looking at that, even today, it was a tough Motorcycle with loads of interesting parts and so Glad that I jumped in and had a go at creating this machine, there wasn’t many Café bikes at all about, so many people used to comment on what sort of bike it was and I think i was lucky enough to inspire a few people to have a go their selves and create their own unique ride.

 

My First attempt at a Custom Gauge, using an original one, I wanted to put BOOM at 140 MPH, got many comments on that and it was a great discussion point at shows etc.

I fitted an Original Series One Yoshimura exhaust of which was the pattern for all the systems I make today, I used a CB750 Connecting Rod for the license Plate holder, I later swapped the plate to the other side as the exhaust gases would tarnish the chrome lol. They are New Old Stock FOX shocks too and they really did give the ride height that I wanted on 18 Inch rims.

 

Allen bolts all through out the build and I did my drilling style on the sprocket cover just the break up some of the glow of the polishing, I have made many of these covers and sold to customers too over the years.

Rear Hub gets the same treatment and that’s an Original Dresda Boxed Swing arm that I chromed and boy does it look sharp on the bike, it really does accent that rear end.

I used Cow Hyde to upholster the Custom seat and used Gel foam for a comfortable ride and its a nice riding position with that 5 inch stretched gas tank.

Everything I feel on this Motorcycle Flows well, its such a warm color too, I hope that you liked just some of it as I know that you understand how much effort goes into creating a machine such as this.

Time has moved on and this bike now resides somewhere in Australia and hope the owner is having fun with that Custom built CB750 HONDA.

I took this bike to many shows all over the USA and had many great conversations with like minded people.

I think this was Seattle show but ALL the shows were super fun and made so many friends and acquittances etc. it’s a healthy industry now and I am still making many parts for these super fun inline four motorcycles.

I used a headlight from an Old DeSoto Automobile as I think it fitted in between the fork ears really well, I hand drilled the front Rotor using my drill press, I even made the bike stand.

One of the last photos before the bike made her way to the other side of the world but am proud to say I created that Monolith of a Café Racer.

As you can see, on the Right side of the bike, I fitted an old 1974 ARD Magneto, that too is Belt driven and gave the bike its Status Quo, she sure does sit well on the Tarmac too.

I used a Pontiac Taillight for the rear on My Custom Rocket Four seat assembly and I still sell them to this day and send all over the Globe.

Thank you for reading my Blog today, I just wanted to show you a bike that I really did have fun creating and love seeing what you lot are putting together. Below is a before and after shot.

Have fun with what ever you are creating and if I can help, you can call, email or even text me, I am always here to advise Thanks again and keep on building and Riding.

.

Playing about in the garage with an old snotty frame

Well, I need to clean some of my old storage out and thought I would have a bit of a play about today, being its Sunday , and see if I can at least come up with some sort of rolling frame.

 

So a few bits and bobs were put together to see where this may go, not sure what style or Caff or Brat style but just having a dig around out of my old parts to see where we end up.

I had about 3 hours to spare today and wanted to try and at least collate some parts that have been getting in the way in storage and this would be a fun project to start on today in the garage.

So, a fun afternoon just playing with an old neglected frame that had been butchered up many many years ago and to save it from the junk yard, I took it off a friends hands and thought that I could at least do something with it and save another inline four from the scrap pile.

Well its all about there, not sure if I like it or not, the Alloy 5 Gallon hand Made gas tank is fun but not sure on the seat and I do not like the handlebars at all, but thats all I had kicking around the garage, either needs Clip on’s or a set of Ace Bars.

Not sure on the smaller LED headlight right now but I had these old parts laying about here in my garage, so its a mock up and I am sure this bike will go through a few guises until I am happy with the look and the style that I want to try and create.

Up in my Rafters, I had a coupe of old Dresda swing arms, this one is a NOS CB750 version, so I thought I may as well use the thenig and am happy that I have, of course I shall run a wider rim later too as I want to fill that void up.

I had some old Tarrozzi rear sets brackets so if I go the Caff route, then the ends of the brackets of the frame will get nipped off and sealed up with weld for a clean look.

The whole point of me mocking the bike up , is to see if there is any parts that I really like and may help the bikes lines flow nicely, I am not sure on this old CR750 seat, its ok but I am just not feeling it to be honest, so I may put this one back in the storage and think again.

 

The 5 Gallon Manx tank is cool but I am not feeling it on this frame at all right now, mainly because I am not a fan of the handlebars I fitted, but as its a Sunday and I am using parts from the garage, it will do for a while but am sure this will change its look as time goes on here.

But I have it all mocked up and I may go with my Custom gauges, just for that Classic look and will refurbish the left speedo to match the Skull and cross bones tachometer.

Just want to show that I do use old knackered parts and I can change the look and style right here in the garage, as this build goes along you will see some progress shots but I need to have a rolling frame that I am happy with, before I tear it all apart and start to the tiresome hours of welding, grinding, sanding and refurbishing, until i am happy with the way it is looking.

it looks ok but just not turning my crank, so i think I will try another petrol tank as some times that alone can change the lines and flow of a bike, so i have an old k3 gas tank I can plop on and see what that looks like compared to this Manx Alloy version.

Well, I do like the Original tanks of the K series, but not sure I like the seat at all now, thats all part of the mock up, just keep going unto you are happy with the look that you are after, this may take some time, but its all worth it in the end, you just cant rush this stuff.

Well, the Handlebars are now doing my head in and as the light is starting to go I may pull the plug for this afternoon and re-charge myself once more and see where we go on this old girl.

The main objective today was just to piece together a bunch of old parts that have been collecting dust in my storage and around the garage, so at least I have made some progress to some extent.

I am glad that I used the Dresda swing arm and hope to be banging out my own version of these again, but stay tuned to how this old K model is going as i hope to make a cool, head turning machine that will belt along the highways and byways of Southern California, stay tuned……………………………..

 

The Humble beginnings of the 59 Club.

HOW THE CLUB BEGAN


This is an article published about Father Bill when he passed away and his own words on the start of the club, It describes our first links with the ACE and how they are part of our history with few words by an early member Palladin

My Memories of Father Bill and the 59 Club are still very vivid.
By Palladin
I got to know Father Bill reasonably well and found him very approachable and down to earth person, very likable but did not suffer fools. I remember him coming to the Busy Bee on one occasion and he was in a bad mood he had just come off his Bike and damaged his new gloves, we had a laugh at the time as we thought he would like to swear to relieve his annoyance.
Father Bill always used to tell of his first visit to the Busy Bee when some one drove in one door and out the other, I have to admit that was me in my young silly days just 17 but should have known better.

bill010

I did not meet Father bill on that occasion but as a result of his visit to the Bee a group of us when to the opening of the 59 Club in October 1962. The last time I spoke to him was after he retired about 18 years ago the Busy Bee Club were having a reunion, I was asked to contact him and invite him to attend. I eventually made contact with him and we were talking about the times at Hackney Wick I said to him about the Dorchester and the other things that we had done, I can’t remember the exact word but it was along the lines that he had met so many people over the years and it was difficult to remember names so it would be difficult for him to remember it I said my name, I said that in those days my nick name was Palladin, he retorted I remember you you road though the Bee on my first visit.

I wish he had remembered me for a good deed.
Whilst I have all the photos and cutting from that period I have managed to loose my original membership, I was below 10 I think number 7. So myself and my friends from the Busy Bee where there right from the beginning.

 

59-club

I was fortunate enough to be invited to afternoon Tea at the Vicarage., to go to Blackpool with Father Bill and stayed overnight in a church hall it was the first trip arranged by the 59 club. The most exciting and memorable was to the “Fleur de Lys Ball” at the Dorchester where a small group of us won a draw to go to the charity Ball and represent the 59 Club. I am fortunate to have had a lot of pictures in Books and Magazines to remind me of that time.

 

129-520x910

Father Bill was still active in later years it worth reading his story. It is interesting that in 1991, when he was over 70, Wrangler jeans invited Father Bill to spearhead a new advertising campaign, for which he was photographed under Southend Pier astride a 1960s motorbike. When he was approached by Wrangler, Father Bill sought the advice of his rector, who told him: “Of course you must do it. Good for the Church to be seen doing ordinary, rather silly things.” ( Bill was chairman of the 59 until his death a regulary attended AGM’s)

By 1964 the 59 Club was the biggest Motor Cycle Club in the World with 3,800 members, the club was immortalised in Giles cartoons. I am proud to have been a member of the 59 Club to have been there on the first night, to have been one of the first to join and to have part of it in its early days. Also being lucky to be in the right place at the right time to be involved with events such as the Dorchester also to have had the opportunity to get to know Father Bill, his passing is a sad loss to all those that knew him.


The Rev William Shergold, priest and motorcyclist, was born on October 17, 1919. He died on May 17, 2009, aged 89

By Rev. Bill Shergold. From Magazine of the Fifty Nine Club, November 1966

 

59club

 

For the next two or three years I used the bike for pottering around my parish, but the thought never entered my head that one day I would start a club for motorcyclists. Most of my time was taken up with the youth club, which had just been launched by the Revd. John Oates. Perhaps I ought to say a word about this club because it answers the question of why the club is called the 59.

“The club which we now know as the 59 Club started in 1962 as a section of the already flourishing 59 Club of the Eton Mission.”

This was the club we started in January 1959 with Cliff Richards as our guest star. We called it the 59 Club because we wanted to get away from the rather stuffy image of the traditional church youth fellowship. It was immensely successful from the start and many well-known recording stars came to visit us. The most fabulous evening of all was the night we were visited by Princess Margaret and her husband, together with Cliff Richard and the Shadows..


By this time the motorcycle disease had really taken hold of me. I traded in my C15 for 1959 Speed Twin and began to enjoy the thrills of a bike. I even bought a crash helmet(police-style with peak) and a leather jacket(three-quarter length, of course). Then one day I read in the daily papers that a special service for motorcyclists had been held in the newly opened cathedral at Guildford. This struck me as odd because cathedrals tend to be rather respectable. But it gave me an idea.

I caused a minor crisis at the hospital by riding my bike into a rainwater down pipe and smashing it. Bob sent me along to the North London branch of the Triumph Owners Club which in those days had its headquarters in a Quaker meeting house at Stoke Newington.
I shall always be grateful to the members of the TOMC for the way they welcomed me and backed up my ideas. Up to this moment I had been very much a lone motorcyclist. Now, through the Friday evening meetings at Stoke Newington, I found myself enjoying for the first time the fantastic comradeship of the motorcycle world.

Meanwhile plans were slowly taking shape for our big event which was now fixed for a Sunday in May, 1962. We had roped in the local road safety officer and we sent out dozens of circulars to all the motorcycle clubs in the area. Then something happened which was to have a profound effect on the whole future course of events.

 

One day, while I was talking about the service with some of the lads from the Triumph Owners Club, somebody said: “Of course the people you really ought to invite to your service are those young hooligans who go blasting along the North Circular Road.” “That’s all very well, ” I said, “but I don’t’ know any of them. How can I get in tough with them?” “If you really want to meet them you should go along to the Ace Cafe.” “Okay,” I said, “I will!”

Until know we had thought only of inviting members of highly respectable motorcycle clubs to our service. The other section of the motorcycling fraternity was completely unknown to me. I did recall, however, a magazine article I had read some years before whilst waiting to have my hair cut. It was the sort of article which appears from time to time in the American Press, describing the activities of the Hell’s Angels. It was lavishly illustrated with pictures taken at the Ace.

 

It certainly wasn’t calculated to inspire confidence in anyone proposing to visit that cafe for the first time.
The more I thought about it the more alarmed I became. The time I chose my trip to the Ace was a Sunday afternoon. Had I known more about the habits of young motorcyclists I certainly would not have chosen that particular time. The Ace is about 13 miles from Hackney Wick and I set out with several posters rolled up on the back of my bike, hoping that I might persuade the proprietors to put one up for me. Unsure of the kind of reception I should get, I wrapped a scarf around my neck covering up my dog collar. Just past Staple’s Corner about a dozen bikes ridden by sinister looking figures in black leathers roared past in the opposite direction. I felt almost sick with fear.

53

 

By the time I had passed under the bridges at Stonebridge Park, I was in such a panic that I opened the throttle up and fled past the Ace as fast as I could. Then I realized that I was being a coward.


So at the next intersection I turned back. Again panic seized me and I went past. Then I turned back a second time and finally rode into the forecourt. By this time, the Ace was practically deserted. I ordered a cup of tea and sat drinking it, my face crimson with embarrassment. I left for home with out getting rid of a single poster. But I consoled myself with the fact that I had at least penetrated into the lions’ den, even if the lions were in fact out on the prowl.
Several weeks elapsed before my next attempt to reach the boys at the Ace.

In fact It was the night before the service was due to take place that I finally summoned enough courage to go there again. This time I made no attempt to conceal my collar and I went armed with a bundle of leaflets which said: “This is a personal invitation to YOU to come to church next Sunday for a special service for motorcyclists.” It must have been about eight o’clock on the Saturday evening when once again I entered the forecourt at the Ace.

It was packed with bikes. Hundreds of boys were milling around, laughing and talking. “This is it, ” I thought, “I shall almost certainly lose my trousers or land up in the canal.” I rode up to the nearest group and went straight to the point. “I want you all to come to church tomorrow.” Looking back I am amazed at my own nerve- I, a middle-aged clergyman invading the stronghold of one of the toughest groups of youngsters in the country.
There was no joking, no mickey talking. Instead they came crowding round, bombarding me with questions: “What’s it all about? Where is it? How do we get there?” Someone brought me a cup of tea. I never got inside the Ace at all- people kept coming to talk with me outside. All in all it was the most fantastic evening I have ever spent.


At midnight I managed to get away to snatch some sleep before making final preparations for the services at three o’clock the next day….. And what a service it was! Several days before I had issued a kind of press release, hoping that the papers would give us some advance publicity and so ensure we had a congregation. Only one paper mentioned it beforehand, but they turned up in force on the day itself-I suppose there must have been a dearth of murders and international crises that weekend. In addition, BBC and ITV sent news teams and I think there was a newsreel team there as well.

The theme of the service was that we should dedicate our bikes and ourselves to God’s service, endeavoring to use the machines in a responsible sort of way. In my address I compared the present-day motorcyclist to the knights of old and suggested that we should try to uphold the same ideals of courage, courtesy and chivalry.

To drive home the idea we had arranged for a number of different bikes to be placed inside the church-symbolizing the offering of our machines to God. It was a strange assortment, ranging from a Tina scooter to a magnificent Manx Norton which had been raced the previous weekend.
Looking back I suppose it was a bit of a gimmick to have the bikes in church. I never intended it that way. People bring cabbages and marrows to church for the Harvest Festival and no one complains. It seemed to me perfectly natural for those who love motor bikes to bring them into God’s house.

Shergold1

I can’t imagine how we got through the service at all. There were photographers and cameramen everywhere. The church looked like a film studio with all the lights and trailing wires. Yet despite all these distractions there was a wonderful atmosphere of devotion and reverence.
Next day the papers were full of what had happened at Hackney Wick. Here are some of the headlines: “The Knight Errant’s of 1962 – Ton-Up Kids in Church”, “Ton Up Bikes Are Blessed”, “Pictures of a 100-mph Gang that may Cause a Storm”, “Blessings by the Ton”, “A Vicar blesses the Ton-Uppers.” One paper rang up the Bishop of London at midnight to ask him what he thought about it all!

 

bill014
On Tuesday several papers published cartoons, the most famous of which was by Giles in Daily Express. I wrote and told Giles how much I had liked his picture and to my delight he sent me the original drawing signed by himself. This is one of my most treasured possessions and occupies a place of honor in my study. I was a bit overwhelmed by all this publicity.

But for me it had one great advantage. I couldn’t care less about having my pictures in the papers. What did please me was that almost overnight I had made friends with the boys at the Ace. Press cuttings and photographs poured in to the vicarage, so I took them up to the Ace and showed them around.

The lads were delighted at receiving some good publicity for a change. In the past any mention of them in the press had been unfavorable. I soon became a regular visitor at the Ace and got to know some of the lads quite well. One of them even invited me to his home to have lunch with his family. Others began to tell me about their mates in the hospital. At this time, also, I received considerable “fan” mail, some of it complimentary, some of it not so nice.

One anonymous letter warned me of the dire consequences that would follow if I continued to associate with these “leather-hearted louts.” From these letters, but above all from the conversations with the boys themselves, I soon began to realize that they were virtually an outcast section of the community. Because of their dress, their noisy bikes and their tendency to move around in gangs, nobody wanted them.

Dance halls refused them, bowling alleys told them to go home and change into ordinary clothes. Youth clubs were afraid of them. Even the transport cafe’s didn’t really welcome their custom. After all, a motorcyclist consumes on average a cup of tea or Coke every two hours.

A lorry driver or a coach tripper will spend five bob on a meal and be on his way within 30 minutes. I was becoming more and more convinced that what they really needed was a new kind of club which would combine the personal and friendly touch of a youth club with the free and easy atmosphere of a transport cafe or coffee bar.

My difficulty was that our premises at the Eton Mission were already being used almost to capacity. And in any case, Hackney Wick is such a difficult place to find in its maze of one way streets that I doubted very much if it would meet our requirements.
Eventually I decided on an experiment. It so happened that the 20th anniversary of my ordination was approaching. Instead of having a party for my Parishioners I decided to throw a party for my new friends from the Ace. It was a tremendous success. About 80 turned up, thus proving that the situation of the Eton Mission was no obstacle.


At this point I was fortunate to come in contact with two existing motorcycle clubs, both of which showed real interest in my plans for a new club. I well remember being approached outside the Ace one day by Mick Ingarfield of the Friendly Club, who invited me to HQ at Hammersmith to meet their members. About this time, too, I met Garth Pettitt of the Sunbeam Club. Garth is an astonishing person – he holds some high position in the Civil Service but thinks nothing of arriving at a Mansion House reception on his SS Norton and changing out of his leathers in the gents.
There two clubs were tremendous and I can never adequately repay their kindness in supporting me in these early days. Eventually we decided to make use of Saturday nights – the only time when the halls were not being used – And to launch the new club in October, 1962.

 

 

As a matter of fact it was never intended that it should be a club at all – as witness the affectionate title of the Vicar’s Caff which it was soon given. The question of finding a suitable personality of the motorcycling world to open the club was solved during one of my weekly visits to the Ace. I was sitting at a table drinking tea and showing photographs to a crowd of the lads when I noticed at the next table a gentleman of more than ample proportions.

 

 

How he managed to fit himself into one of those funny swivel seats I have never discovered. He was obviously bursting with curiosity and in the end could contain himself no long. He introduced himself as “Harold Harvey” and asked if he might see the photographs. It appeared that he was a photographer and often went to motorcycle race meetings to take action pictures. He said that he might be able to find us a suitable guest. As a result of this chance meeting we not only secured the services of Alf Hagon on the opening night but the Club acquired its first adult helper.
I would like to pay tribute to all that Bob Harvey has done for the club since its inception. In order to publicize our opening night as widely as possible we prepared some handbills which I took around to places like the Busy Bee, the Dug-Out, Woodlands, Johnsons and of course, the Ace. I never found it easy visiting a cafe for the first time but in the case of the Busy Bee I was lucky.

 

A German TV company was making a documentary film about British youth and asked me to put them in touch with some young motorcyclists. Off I hurried to the Bee to find motorcyclists to take part in the filming. I needed no further introduction at the Bee. We spent hours making the film and the lads had a wonderful time. I shall never forget riding three-abreast down the Watford By-Pass at one o’clock in the morning with a TV camera filming from the back of a van and enormous arc lights blazing in our eyes.


We have to thank the Daily Mirror for another bit of useful publicity at this time. Among my many letters was one from a keen motorcyclist in America. He enclosed a type-written prayer which was widely used by members of his club. I trimmed it down and had it printed on cards, small enough to carry in a wallet. The problem was to distribute it. I have always shrunk away from using my friendship with the boys in the cafes to thrust religion at them.
So I hesitated to hand out the prayer cards myself. Instead I sent one to the Daily Mirror who were kind enough to give it quite a splash. I received applications from all over the country.

 

The most amusing was from an MoT examiner who asked for 50 copies, explaining that he proposed to give one to every motorcyclist who came to him for his driving test.


The article in the Mirror was also occasion of another cartoon at my expense. This time I was provided with a wife – but not a very attractive one. She piloted a sidecar outfit while I perched precariously in a gothic-looking pulpit balanced on the chair. I was pictured with a megaphone, calling out to the passing motorcyclists. The caption read: “I’ll say one thing for the vicar – he’s determined to get through to us.”


Well, the message certainly got through. At our opening that October evening we had an attendance of about 100. They were the first of thousands; and they were in at the humble beginning of what was soon to become the largest motorcycle club the world has ever known.

images

 

Carpy’s 2 cents worth:

I remember reading some of these in the little books that floated about and is so great to re-read this article, I distinctly remember Father Shergolds experience on the North Circular to the Ace, because we lived not far from there in North London and my mum even closer grew up in Enfield Middlesex.

The Rocker subculture came about due to factors such as: the end of post-war rationing in the UK, a general rise in prosperity for working class youths, the recent availability of credit and financing for young people, the influence of American popular music and films, the construction of arterial roads around British cities such as the North Circular Road in Middlesex and North London, the development of transport cafes and a peak in British motorcycle engineering.

And now it flourishes all over the globe and me being proof of that as I am the President of the 59 Club in the O.C. area of California.

We always have fun and if you are into these like we are come check a ride or meet up with us on:

http://www.meetup.com/Carpys-Cafe-Racer-Meetups/

58bus

Norton unveil the Mick Grants Special Cafe Racer series

A great day for Classic Bike enthusiasts, as Norton Unveil this Mick Grant Special.

Norton launch exclusive Mick Grant Replica. We are proud to reveal a stunning replica of Mick’s famous #7 JPS Norton. Only 7 bikes are being hand built for global release today. For all inquiries please contact karen.fearon@nortonmotorcycles.com we are working on a strict first come first served basis as this exclusive run of bikes are sure to become very sought after. All owners will get to meet Mick at the Norton factory as they collect their handbuilt bike which comes with signed certificate and a picture opportunity with Mick and their bike. Norton have worked with Mick within the TT race department in the last few years and wanted to do the bike as a thank you and to pay homage to what was and still is a fabulous career within motorcycle racing. Well done and a HUGE thank you from ALL at Norton to Mick Grant.

 

Such a Nostalgic look to this New ride and I am sure Mick would be tipping his hat from above if he claps eyes on this thing of beauty.

 

With those Anodized Ohlin shocks, you know that this will help you around the next bend with none of the Old Girling lumpiness that it used to be.

I wonder who is going to be the lucky 7 owners of this model, a rare bike right off the factory floor and I sure hope that I get to see one over here.

 

 

MY OLD SEELEY HONDA

 

 

 

 

Well, back in 2007 I was lucky enough to have not One , but Two Seeley Honda’s and this one I am featuring was a really sweet ride and one of the last ever made by Colin Himself.

I saw Colin at Snetterton race track back in 1977 as this was the year before I left school, I hitched a ride on the back of a old Gt suzuki and jumped the hedge to get to see the trans- Atlantic races, Colin was there with a Honda britain and boy did that bike stand out, Colin was far superieor to anyone with frame design back then and this Duplex cradle from for the DOHC and round swing arm was a first and boy did it perform, little would I know that later on in life on the other sode of the world, I would own 2 of his examples.

 

 

This was complete with Lester rims and had never been touched since 1978 when it was assembled and sent to the USA.

 

This still had the Original Number plate on the bike of which i rode about for a while with this on, reminded me of home. 

 A fantastic machine, the Duplex cradle frame handled the road like a Ducati, this was a 836cc motor and it purred through the Dunstall exhausts.

 

 This even had the original Avon tires on the bike and road it with them on, I was so stoked to get the machine running as it had ZERO miles on the whole bike.

 

 The rear Lester rim was unusual as Seeley had used a stock CB750 Hub and machined it to fit the rest of the rim.

 

 The Paul Dunstall rear sets really were a superb set up and so smooth.

 

 

 This was the last bike made and left the shores of back home in 1978 which for me was cool as that was the year I left School.

 No stickers here, Colin used the same sign-writer for years, so these were all hand lettered.

 

 

 You do not see many of these around these days but the ones you do are used and some are even raced on a track and I love seeing that.

 Early front forks with a Double disc set up was the trend of the day and worked very well once it was all bled etc.

 The Tommesselli clip ons were amazing and set just right, the bike handled so well.

 

 I had original Koni shocks on here too.

 

 Paul Dunstall rear sets were so nice and smooth in the gear transition it was a super ride.

 

 Round adjustable rear swing arm was a really good engineered design and function so well.

 

 

 Original cb750K hub had been machined and pressed into the rear of the Lester rim which was a disc brake version.

 836cc old Bellmouth Velocity stack and untouched since 1978.

 

 The Paul Dunstall megaphones sounded really sweet and had a nice deep tone as you shifted gears.

 

 

 Alloy rear seat was comfortable and had the original tuck n Roll cover and had the Colin Seeley initials hand painted on the sides.

 

 I doubt I shall be lucky enough to have another of these but so glad I had the chance to own 2 of them and ride this, the bike now resides in Brisbane- Australia.

 

 A superb time piece and something I believe will always turn a few heads when it blaps down the road.

 

The bike was such a lovely design, and a dream to ride, the bike hugged the corners like a Ducati and the motor was a strong 836cc that put the power to the tarmac with a Linear feel and as this also had a Jerry Branch head, the bike pulled hard when you got over 5000 revs.

 

 

 The fairing has a few scuffs and a lot of it all cleaned off, but the brakes were seized but only took a couple of hours to get everything dialed in.

But as this was the last bike to be made, the sign writer must of been in a hurry , as he painted the logo the wrong way around, making this an even more unique machine.

 

 This bike had ZERO miles, I did about 11 miles on it and loved every mile of this ride.

 So- if you see a Seeley, take a good look at the cool work that went into that bike as the frame is a piece of art.

 Hope you like the photos? I was lucky enough to get in  a few magazines with this machine.

 

 Time waits for no man and now a geezer in Australia is bombing about on this machine with a mile wide smile.

 

 On the road and this bike was just pure fun to ride and like stepping back in time to 1978 as nothing had changed on the bike at all.

 

 Sure wished I had videoed it as the sound of the exhaust tone was really cool and unusual to hear these days.

 If you see a Seeley for sale- grab it, a cool piece of history and Colin is still around and meeting people at bike shows and race events.

 

 

 

So until I find another one, I will bid you all a fond farewell and hope you enjoyed the photos?